CP200/400/600/060

Centrifugal Oil Cleaner CP200/400/600/060 A full flow filter is added to the centrifugal filter. This enables ten percent of the lubricant supplied to the engine through the lubricant pump enters into the centrifugal filter in operation and remove ultra fine particles to purify the oil in the crank case of trunk type ship engines. This prolongs engines life and the increases the effective lifespan of lubricants and filters which provides management cost savings. ¦Centrifugal Oil Cleaner¦ Purification of crank case oil for trunk type engines Oil Purification using by by-pass system...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• Centrifugal Cleaner made in Korea
• Centrifugal Filter made in Korea

Mechanical Cylinder Lubricator

Mechanical Cylinder LubricatorCylinder Lubricator (MAN Type) The mechanical cylinder lubricator is a volumetric pump composed of a plunger and a barrel. The cylinder lubricator is designed to supply a set amount of lubricants to the cylinder liner. The main objective of the lubricator is to minimize friction and corrosion between the pistonring and the cyliner liner and increase the sealing effect. The operation of the lubricator may be monitored by a non-flow or low-level alarm device installed on it. ¦Specification¦ Model No. of Lub. Points Plunger Dia(mm)/(inch)...

• Machinery, Industrial Parts & Tools made in Korea
• Cylinder Lubricator made in Korea

Alpha Cylinder Lubricator

Alpha Cylinder Lubricator -Lubricator units On the lubricator unit. two lubricators for engine type 70-98MC/MC-C are installed in addition to an accumulator where nitrogen is charged. On each lubricator's outlet an accumulator charged with 1.5 bar nitrogen is installed. Each lubricator has four, five, or six piston rings depending on the feedback pickup and solenoid valve. -Booster pump unit The booster pump unit is composed of two separately managed pumps, heating oil, filters and suction tanks. Electricity is transmitted to the booster pump starter panel from two separate circuit...

• Machinery, Industrial Parts & Tools made in Korea
• Cylinder Lubricator made in Korea
• Cylinder made in Korea
• Lubricator made in Korea

Air Starting Motor

Air Starting Motor The SM series starters are air starters with a leading-in device made to operate from diffrences in air pressure at the entrance and in the overall surrounding temperature. The actual minimum pressure to start is determined by the engine load and/or size. The starters of the SM series operate by compressed air. Small alien substances or lubricants in the air do not critically affect the operation of the SM series. SM series starters do not require a lubricant in the supplied air. ¦Specification¦ Air Starter is equipped with a pre-engaged device to start the engines....

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• Air Starting Motor made in Korea
• Starting Motor made in Korea