SHAIC HS-3401HT Heat Shrinkable Sleeve for High Temperature

Introduction SHAIC HS-3401HT is designed for welded joint protection for high temperature up to 80 (176) of plastic coated steel pipelines such as PVC, polypropylene, polyethylene, or fusion bonded epoxy. It has a thick irradiated crosslinked polyethylene backing coated with heat sensitive adhesive and two parts of liquid epoxy primer. Apply epoxy primer to the pipe surface and then adhesive flows and forms a reliable corrosion protection seal onto epoxy and adjacent coating surface. SHAIC HS-3401HT is complied with EN 12068-C HT 80 UV. Long-Term Corrosion Protection After heating,...

• Fuels and Lubricants Materials Made in Korea
• Heat Shrinkable Sleeve Made in Korea
• Field Joint Coating Made in Korea
• 3-lay Made in Korea
• Heat Shrinkable Tape Made in Korea
• Anti-corrosion tape Made in Korea
• PE Tape Made in Korea
• Petro Tape Made in Korea

SHAIC Repair patch, Mastic Filler, Melt Stick

Introduction SHAIC pipeline coating repair products are widely used from the field in which is the pipe coating damaged for a continuous stipendiary prevention effect. The Repair Patch, Mastic Filler and Melt Stick are the product. It will be able to repair the damage which occurs from pipe transportation and load process effectively. Repair Patch Repair Patch is composed of fiber inserted cross-linked polyolefin backing and heat sensitive adhesive. This product has superior adhesion and sealing up effect as well. It will be able to expect reliable corrosion prevention and shear...

• Fuels and Lubricants Materials Made in Korea
• Repair patch Made in Korea
• Repair products Made in Korea
• Mastic filler Made in Korea
• Melt Made in Korea

SHAIC HT-350 Heat Shrinkable Tube

Introduction SHAIC HT-350 is a heat shrinkable tube designed for corrosion protection of field-welded joints of plastic coated steel pipelines. It has a thick crosslinked polyethylene backing coated with butyl rubber based mastic sealant or hot melt adhesive. When heated the backing layer shrinks and the sealant flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces. Tubular Configuration SHAIC HT-350 needs no patch closure and should be slid over the pipe prior to welding the joint. Its unique design reduces time for handling, positioning and...

• Fuels and Lubricants Materials Made in Korea
• Tube Made in Korea
• Heat Shrinkable Tube Made in Korea
• Heat Shrinkable Tape Made in Korea
• Anti-corrosion tape Made in Korea
• PE Tape Made in Korea
• Petro Tape Made in Korea

SHAIC HS-3401 Three Layer Shrink Sleeve with Epoxy Primer

Introduction SHAIC HS-3401 three-layer heat shrinkable wraparound sleeve is designed for welded joint protection with epoxy primer of plastic coated steel pipelines. It has a thick cross-linked polyethylene backing coated with heat sensitive adhesive and two part of liquid epoxy primer. Apply epoxy primer to the pipe surface and then adhesive flows and forms a reliable corrosion protection seal onto epoxy and adjacent coating surfaces. Long-Term Corrosion Protection After heating, formed corrosion protection seal and strong backing provides outstanding waterproofing effect and...

• Fuels and Lubricants Materials Made in Korea
• Heat Shrinkable Sleeve Made in Korea
• Field Joint Coating Made in Korea
• Heat Shrinkable Tape Made in Korea
• Anti-corrosion tape Made in Korea
• PE Tape Made in Korea
• Petro Tape Made in Korea

SHAIC HS-340 Heat Shrinkable Sleeve

Introduction SHAIC HS-340 is a heat-shrinkable wraparound sleeve designed for corrosion protection of field-welded joints of plastic coated steel pipelines. It has a thick cross-linked polyethylene backing coated with butyl rubber based mastic sealant or hot melt adhesive. Hot Melt or Mastic shall depend on project requirements. When heated the backing layer shrinks and the sealant flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces. Cut Sleeve is normally supplied with separate Patch Closure, which is coated with a high...

• Fuels and Lubricants Materials Made in Korea
• Heat Shrinkable Sleeve Made in Korea
• Field joint coating Made in Korea
• Heat Shrinkable Tape Made in Korea
• Anti-corrosion tape Made in Korea
• PE Tape Made in Korea
• Petro Tape Made in Korea

SHAIC HT-330 Heat Shrinkable Tape

Introduction SHAIC HT-330 is a hand wrapped heat shrinkable tape designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. It has a cross-linked polyethylene backing coated with butyl rubber based thermoplastic adhesive. When heated, the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces. SHAIC HT-330 needs no primer nor patch closure and reduces application time and labour costs. Long-term Corrosion Protection After heating, formed corrosion...

• Fuels and Lubricants Materials Made in Korea
• Heat Shrinkable Tape Made in Korea
• Anti-corrosion tape Made in Korea
• PE Tape Made in Korea
• Petro Tape Made in Korea

SHAIC PT-310 Petrolatum Tape

Introduction PETRO TAPE is composed mainly of petrolatum, tannin, inert silica and special anti-corrosive agents, it will never evaporate, harden and its viscosity will never change. It will never crack or peel off. Since it can perfectly adhere to any material and any complicated shape, the viscosity film formed on the applied surface prevents the penetration of moisture or air onto the applied surface. Thus, prevents all physical factors of corrosion. Because the composition of PETRO TAPE is chemically stable; it will resist acids, alkali and salts. The anti-corrosive effect never...

• Fuels and Lubricants Materials Made in Korea
• Petro Tape Made in Korea
• Petrolatum Tape Made in Korea
• PE Tape Made in Korea
• Heat Shrinkable Tape Made in Korea
• Heat Shrinkable Sleeve Made in Korea

SHAIC AC-700 P.E.Anti-Corrosion Tape & Primer

Introduction SHAIC AC-700 SERIES are designed for provide reliable corrosion protection & mechanical resistance to metal pipes, underground steel pipes, and bare bends & girth welded joints of PE, Epoxy & PP coated pipes by hand or machine application. The main material used is a stabilized polyethylene backing and butyl rubber based synthetic elastomer adhesive, especially in case of joint wrap, bitumen based synthetic elastomer adhesive available. SHAIC AC-700 SERIES are used as Inner wrap, Outer wrap and Joint wrap by customers’ requirements with various sizes. FEATURES - ...

• Fuels and Lubricants Materials Made in Korea
• PE tape Made in Korea
• Anti-Corrosion Tape Made in Korea
• Field Coating Made in Korea
• PE Tape Made in Korea
• Petro Tape Made in Korea
• Heat Shrinkable Tape Made in Korea
• Heat Shrinkable Sleeve Made in Korea
• Heat Shrinkable Tube Made in Korea