Electronic Accessories & Supplies Manufacturers | Electronic Accessories & Supplies Suppliers - K.T.CL

T-P/T-N Analyzer

T-P/T-N AnalyzerModel No. : TPTN-300 Features Reduction of reagent consumption (approximately 1/10 than before) Reduction of waste water after measuring (approximately 1/5 than before) Reduction of power consumption (approximately 1/2 than before) Continuous measuring available without water supply device (approximately 1/4 than before)-Pure water supply available by tank Reduction of weitching part (approximately 1/2 than before)-Simplited measuring flow Small-size and compact figure-Storage available with UV sum total in teh installation case outside(option) Total...

Read More Inquiry Now
Data Logger EMS-365W

Data LoggerModel No. : EMS-365W Features Recognizes concentrations of pollutant, discharge amount, electricity stage, opening and shutting of gate, state of devices, real time graph port state, transmission state and etc. at once Collects measured data as voltage signal, electric signal and many other ways Remote order executing function Data transmission request, automatic water collecting device control, time change, password change Data collecting device initialization, calibration value search, additional intro request Easy access function Graph inquiry, data search...

Read More Inquiry Now
Dehumidifier

DehumidifierKST-100, KST-1000Electronic dehumidifier for gas is always applied to the measurement of high performance gas ingredient, as an application product of Peltier system in which high reliability and stability are proved. Features of the Dehumidifier It has high precision of temperature by applying control unit for cooling. It has no noise due to no mechanical operation section. Installation and carrying are feasible due to small size and light weight compared to compressor system. High stability and reliability are maintained even long-time serial operation, and maintenance...

Read More Inquiry Now
Gas Sampling

Gas Sampling ProbeTo prevent moisture in collecting sample gas in stack, this device filtrates dust through the first and second filter in the heating status of 180°C by band heater, and then conveys to analyzer through pre-treatment system How to select the position of measuring hole in sample collectionSelect the measurement position at the place of stable flow of exhaust gas and of easy and safe measuring, avoiding bent section of stack or the part of cross section shape is sharply changing. For vertical stack, select the position of measuring hole at the place of 8 times and over of...

Read More Inquiry Now
Ambient Air Monitoring

Ambient air Monitoring A realtime O3, SO2, Nox, CO, dust, heavy metal, acid rain, and weather measurement and management system at 16 branches in 6 major cities in Korea and special air-pollutant discharging workplace provides and ideal, costume-made system from selection to installation of environment monitoring system. Ozone AnalyzerModel No. : GUX-313EManufacturer : TOA DKK SO2 AnalyzerModel No. : GFS-312EManufacturer : TOA DKK CO AnalyzerModel No. : GFC-311EManufacturer : TOA DKK HC AnalyzerModel No. GHC-255Manufacturrer : TOA DKK NOx AnalyzerModel No. :...

Read More Inquiry Now
pH Analyzer Wa-200series

pH AnalyzerModel No. : WA-200 Series Features 2 simultaneous measurement available from 1 body-Simultaneous monitoring available of upper & lower part of sample examination group-pH. SS simultaneous measuring available-Discounted price when importing over 2 measuring part Self-diagnosis function equipped Automatic detector recongnition function EMC & lightning by using deposit sensor Continuous monitoring available by ultrasonic waves & air washing system...

Read More Inquiry Now
Ozone Analyzer 724A

Features of Ozone Analyzer Handling and maintenance are simple due to oxide and semiconductor mixed system. Installation type ozone TMS monitor It is not affected by the change of surrounding environment due to built-in temperature/humidity correction sensor and circuit. Set value can be changed voluntarily by the user. It has built-in functions of alarm setting. Misuse of inconveniency is prevented in advance, by enhancing self-analysis and test mode functions. Data collection and analysis can be made easy by data communication software(option). Concentration with high...

Read More Inquiry Now
Auto-Sampler S3-1224N

Auto-SamplerModel No. : S3-1224N Features Adjustment of sample amount possible by purpose-Adjustment of samplingpossible by purpose from 100 to 1000ml Sampling time and interval adjustment-Adjustment sampling start time & interval in advance Cold storage function for sampling storage-Temperature control from 0° to 60°C at 0.1° intervals Water TMS standard protocol support-Sampling check possible Trigger by sensor(Option) Receiving the signal from sensors(rainfall meter, water gauge) and operate Include pollution block function of extracted sampling...

Read More Inquiry Now
Pre-treatment Device

Pre-treatment DeviceIt plays an important role in removing moisture and dust in pre-treatment process before inflow by the analyzer, to measure concentration of gas discharged from chimney by the analyzer. Composition of Pre-treatment Device Normal Temp Dehumidifier1. The device to remove moisture first time at sampling(heating) line(tube)O by cooling dry air through vortex tueb.2. MATERIAL-HOUSING : PE-BODY : PYREX GLASS MIST FILTER1. The device to absorb sample gas flowed in through sample line and remove remaining dust and mist.2. MATERIAL-HOUSING COVER : PVC-HOUSING BODY : PYREX...

Read More Inquiry Now
Temp. Anayzer

Temp Analyzer It is a device to display temperature on the screen installed at TMS room through thermocouple extension wire after attaching temperatures sensor (substance : SUS, measuring range : 0~600°C, sensor length: up to the center of the chimney) using flange in the chimney. It makes accurate measurement due to the temperature sensor by giving correction in measuring velocity. Efficiency maximization and cost reduction can be realized in operating incinerator by accurate measurement of the temperature of the sample discharged from chimney. Specifications Measurement...

Read More Inquiry Now
Control Program

Control ProgramControl Program collects data of all measuring place (water quality/air) through two-way communication. The program has the intention to receive correct data through every error in the communication and data verification of the measuring place, and implements the data in DB in consideration of data compatibility. Features of Control Program Connection to Data Logger: real-time, 5-minute data, and 30-minute data receiving Connection to max. 8 Data Logger Displaying Rate value, 5-minute, 30-minute data, and the status 5 minutes, 30 minutes and monthly data checkup 5...

Read More Inquiry Now
Data Logger

Data LoggerKTS-1122D Data Logger This device collects, analyzes, and saves the data measured by analyzer, and transmits it to host computer. If required, the operation and calibration of each analyzer can be made by remote control of host computer, and the measured data can be collected. Features of Data Logger Data logger should collect measure value 1 time and above per second from analyzer. However, if data transmission interval of the analyzer is longer, the existing collected values should be continued to use. Data logger should have remote analysis, the status output function of...

Read More Inquiry Now
Velocity Analyzer

Velocity AnalyzerVOT-03It measures the flow of dry exhaust gas discharged from chimney serially and automatically, and the flow of dry exhaust gas is indicated by dry exhaust gas amount [Sm3(5-minute cumulative value)]. Pitot-tube type seeks the velocity and the flow by measuring dynamic pressure, the difference of total pressure and static pressure of fluid in the tube. Specification MEASURING TYPE PITOT TUBE TYPE MEASURING ITEM VELOCITY MEASURING RANGE 0~5/50 m/s MODEL VOT-301 RESOLUTION 0.01mmHG ACCURACY ±1%F.S Flow Velocity...

Read More Inquiry Now
O2 Analyzer 326A

Features of O2 Analyzer It is not given by external impact on self-heating temperature, as it has temperature regulation function in the inside of measuring sensor. Lots of data on O2 measure are displayed on the screen by applying LCD Display. The life of the analyzer is extended by using a net on the analyzer cover to diffuse the heat of the analyzer. After-sale service, repair and checkup can be made easily and quickly by preventing corrosion or the deposition of pollutants at the site, making available for changing the connector for suction and discharge of the sample to SUS or...

Read More Inquiry Now
SS Analyzer WA-200 Series

SS AnalyzerModel No. : WA-200 Series Features Ultrasonic washing device equipped in sensor, best when using in water treatment field Red LED for 860nm light source(sensor not affected by light in sample) Turbidity. SS measuring available by 1 sensor(switching mode) Examination device check function (checks window pollution, opweates wash function) Measuring 2 sensor simulatneously in 1 bocy-Simultaneous monitoring of upper & lower part of sample examination group-Simultaneous monitoring of SS. pH-Discounted price when importing over 2 measuring parts Self-diagnosis function...

Read More Inquiry Now
Flow Meter WA-2200

Flow MeterModel No. : WA-2200 Features Various printing out function-Analog : DC 4~20mA-Pulse : Open Collector Pulse-Digital : RS232C, RS422/RS485 Data Logging (30 days-data saving function) Auto Zero Calibration (automatic zero point adjustment function) Measurement possible regardless of ingredient, density, temperature of fluid Easy installation and maintenance Possible use in corrosive gas generating field Possible use in corrosive material measuring field...

Read More Inquiry Now
Principle of Ozonizer

Principle of Ozonizer Ozone(O3) is an allotrope of oxygen in the air, and is generated serially with pale blue color by countless discharge in saw tooth figure in proportion to electricity consumption by filtrate and cool compressed air for removing humidity and pass the humidity removed air through electric wireless discharge.When using such generated ozone in the air, it eliminates ammonia smell and other bad smells as well as sterilization and mixing with water after pouring into water, several harmful heavy metals and agrichemical ingredients, dissolved in the water, are decomposed and...

Read More Inquiry Now
MLSS Meter

Measurement items Selective in MLSS, SS, Concentration, Turbidity (NTU, FTU) Option Water jet / Air jet Features and specification of the product A variety of sensors adopted according to measurement items Frequency output sensor Contact output for auto-washing On-the-spot calibration available (Max. 8 point) SiO2 calibration when outgoing from the factory...

Read More Inquiry Now
Sampling Type Dust Analyzer 815AWD

Sampling type Dust Analyzer 815AWD Sampling type Dust Analyzer consists of sample collector, measuring device, purge air supplier, and monitor with microprocessor. For Sampling type Dust Analyzer, Electrostatic Precipitator and Bag Filter are used for effective filers to remove dust from waster burning equipment. Dry type is mainly used for Electrostatic Precipitator, and wet type is applied by the system to coat water-soluble filter with spray to collecting plate; the latter has higher exhaust treatment speed than dry type and does not generate scattering again. When treating by the above...

Read More Inquiry Now
Cl - Ion Electrode Method HCl Analyzer

HCL Analyzer HCL-103HCL Concentration in exhaust gas, which is discharged from buming up equipment of urban waste, is attracting the attention. HCL is generated from combustion decomposition of organ chlorine compounds such as vinyl chloride pl HCL Analyzer is designed for measuring HCL concentration of HCL, serially and automatically, which is discharged from burning up equipment of urban waste based on the law of air pollution prevention. This analyzer executes the sampling of the fixed flow automatically, by micro computer control. In addition, the analyzer measures HCL in exhaust gas by...

Read More Inquiry Now

We are aimed to help Companies from South Korea to expand their Market Globally. We do Market Research, Buyers Data Sources, Global Marketing, Exebitions and Trade Shows, Global Trade Distribution, Infrastructure & Finding Global Partners on behalf of companies. We help korean companies to sell Made In Korea products from our stores. Get sign up to receive more updates from Best Made In Korea.

© 2022 Bestmadeinkorea. All Rights Reserved.