Occupant Classification Tester

System Overview OC(Occupant Classification) Sensor was developed by IEE and it is used for Advanced airbag system. And, the OC Sensor have very important role that is detecting passenger's weight classification in the advanced airbag system so, it should be checked before shipping to customer. To meet this requirement, Tribit GmbH(Germany) had developed OCS Tester and had supplied vehicle seat manufacturers for checking assembled seat and OC Sensor. For the advanced airbag system, vehicle should have passenger weight classification detection system. One of these detection systems is...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• occupant classification tester made in Korea

Engine Dynamometer System

System Overview Competitive market pressures are forcing most automotive manufacturers to develop new engines with lower emissions, lower noise and higher fuel efficiency. Engine Test Systems are a key component in the strategy to improve engine performance; Hankook BEP has extensive experience in delivering advanced Engine Test Systems that enable manufacturers to achieve their engine development goals. Test Applications Engine Calibration Engine Mapping Emission Testing Advanced R&D Fuel and Lubrication Testing Durability Testing Transmission and Driveline Testing...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• engine dynamometer system made in Korea

Non-Contact Wheel Aligner

System Overview The Non-Contact Alignment machine is used to measure and set vehicle wheel alignment parameters in a production environment. The machine uses laser/camera sensors to continuously measure toe, camber, and caster (option) as the operator adjusts the vehicle settings to the required specification.The NCA machine consists of a heavy-duty structural steel frame with cradle-roller floating plates, vehicle centering devices, laser/camera sensors, wheelbase adjustment system, and safety retaining rollers. Test Item Measurement item Toe: -5°~+5° Camber: -3°~+3° Steering...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• non-contact wheel aligner made in Korea

Crank Torque Test System

System Overview The crank torque to turn system measures the cranking friction torque on the engine short block assembly and ensures the components' existence, type and positions. As well, the assembly of important parts of the short block can be checked by friction (torque) measurements. By checking the fault in Crankshaft in the early stage, this system will reduce the repair man hour and improve the engine quality Test Item Breakaway torque test - main bearing Debris Running torque test - main bearing missing / wrong assembly, crankshaft cap manufacturing defect END play test -...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• crank torque test system made in Korea

Long Block Test System

System Overview The Long Block Leak test system measures the pressure at the Oil gallery and water gallery on the engine Long Block assembly stage. By using pressure measurement data, the leak and blocking status of the assembly can be checked. Test Item Oil line leak test - oil line defect detecting Water line leak test - water line defect...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• long block test system made in Korea

Transmission Dynamometer System

System Overview Transmission Dynamometer System is used for vehicle transmission and powertrain components testing. The main purpose of this testing is durability and performance of vehicle transmission. Transmission is driven by combustion engine or electrical motor, and then measuring unit will check the performance of transmission. The rear axle, transfer case, gear box and powertrain assembly components can be tested by this system, also. System Layout The system layout will be considered by test applications likes FF or FR, 2WD or 4WD and other test specimen. And, these different...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• transmission dynamometer system made in Korea

Roll & Brake Tester

System Overview The objective of Roll & Brake Testing is to provide quality assurance in the end-of-line process; the Tester checks for vehicle faults, proper vehicle assembly, vehicle acceleration performance, and brake performance under operating conditions similar to those found on the road.The Roll & Brake Tester is produced by combining the functions of a two-axle roll tester and a brake tester into one machine; thus, the vehicle's powertrain system and the brake system can be accurately evaluated with one Tester.Designed for sub-surface installation, the deck plate is flush...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• roll tester made in Korea
• brake tester made in Korea

Cam Shaft Torque Test System

System Overview The Cam Shaft torque to turn system measures the cam shaft friction torque on the engine Long block assembly and ensures the components' existence, type and positions. As well, the assembly of important parts of the Camshaft can be checked by friction (torque) measurements. Test Item Breakaway torque test - cam shaft cap Debris Running torque test - cam follower wrong-assembly, cam shaft cap wrong-assembly, cam-shaft cap bending and manufacturing...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• cam shaft torque made in Korea
• test system made in Korea

Cold Test System

System Overview The cold test checks the functioning of the mechanical engine components. Mainly these are crank mechanism, valve train and lubricating system. Today it is also possible to check the ignition system, the injection system, the wiring harness as well as the sensors and actuators. By measuring the sequence of various signals such as intake depression, exhaust back pressure, turnover torque it is possible to form conclusions on the mechanical integrity. Test Item Breakaway torque test - deformation on piston ring, Piston Ring deformation and C/BLOCK scratch,crankshaft...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• cold test system made in Korea

Short Block Test System

System Overview The short block test system measures the cranking torque, pressure and vibration at the oil gallery on the engine short block assembly build level and ensures the existence of the main bearings and con-rod bearings and the block's assembly status. By using torque and pressure measurement data, the leak and blocking status of the assembly can be checked Test Item Breakaway torque test - main bearing, con rod bearing wrong assembly and debris, contamination and debris of cylinder bearing assembly surface Running torque test - crank shaft pin journal, main journal, con...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• short block test system made in Korea

Headlamp Aimer

System Overview The Headlamp Aimer is used at the end-of-line area to adjust the headlamp's horizontal and vertical aim to meet the applicable vehicle safety standard. Test Item SAE Headlamp's control device, balance of fraction, change of fraction, hot spot aiming Headlamps control device ECE LHD & RHD Headlamps control device Fog Lamp control device Hardware Descriptions Control Panel Optical Block: The Optical Block is a major component of the Headlamp Aimer and provides stable mounting and a clean operating environment for the CCD Camera, Fresnel lens, and...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• headlamp aimer made in Korea

Weight Classification Sensor Tester

System Overview WCS(Weight Classification Sensor) was developed by MOBIS and it is used for Advanced airbag system. And, the WCS have very important role that is detecting passenger's weight classification in the advanced airbag system so, it should be checked before shipping to customer. To meet this requirement, HBEP had developed WCS Tester at the first in Korea and had supplied vehicle seat manufacturers for checking assembled seat and WCS. For the advanced airbag system, vehicle should have passenger weight classification detection system. One of these detection systems is WCS that...

• Machinery, Industrial Parts & Tools made in Korea
• Other Manufacturing & Processing Machinery made in Korea
• weight classification sensor tester made in Korea