Auto Parts Manufacturers | Auto Parts Suppliers - B.S.CL

BF-200 Rail Filter with MAP SENSOR

BF-200 Rail Filter with MAP SENSOR[E8 110R-004641][BF System Co., Ltd.] DescriptionRail Filter (BF-200) is all new method. It has a distributor structure which supplies exact pressure to Gas injector(BF-300) of each individual cylinder. It has a pressure sensor inside to send a signal to E.C.U(BF-500) which controls injection based on gas pressure to make optimum engine performance. Also, it has a temperature sensor inside to control injection based on temperature. It has a gas filter to prevent incoming remnants through injector(BF-300) Specification Working pressure : 0~250KPa...

Read More Inquiry Now
CNG Regulator[BF System Co., Ltd.]

CNG Regulator[BF System Co., Ltd.] Description The main function of Reducer for NGV is to lower high pressure to low pressure and to maintain as static pressure. Finally, reducer for NGV provides regular and stable pressure of NGV / CNG to the Injector. Reducer for NGV to maintain stable durability has two-leveled pressure-drop stages. This reducer is produced after test which is 30MPa higher than actual Refueling Pressure. High pressure is dropped on 1st` stage and it is dropped again on 2nd` stage, which can prevent durability problem [Korean manufacturers/Korean...

Read More Inquiry Now
LPG Sequential Injection System

LPG Sequential Injection System[BF System Co., Ltd.] Description LPG Sequential Injection System among the current Bi-Fuel Systems which is using Gasoline and LPG maintains merits of Gasoline system. When it uses gas fuel, LPG Sequential Injection System has same power like Gasoline and provides optimized mileage. It also maintained optimized exhaust-gas status. Performing this system is like below. Mechanically structured REDUCER provides perfectly vaporized and stable pressured gas fuel. RAIL FILTER can supply equalized amount of fuel to individual cylinders. GAS INJECTOR...

Read More Inquiry Now
CNG Sequential Injection System

CNG Sequential Injection System[BF System Co., Ltd.] Description CNG Sequential Injection System among the current Bi-Fuel Systems which is using Gasoline and CNG maintains merits of Gasoline system. When it uses gas fuel, CNG Sequential Injection System has same power like Gasoline and provides optimized mileage. It also maintained optimized exhaust-gas status. Performing this system is like below. Mechanically structured CNG REDUCER provides perfectly vaporized and stable pressured gas fuel. RAIL FILTER can supply equalized amount of fuel to individual cylinders. CNG INJECTOR...

Read More Inquiry Now
BF-C1400 NGV(CNG) Check Valve

BF-C1400 NGV(CNG) Check Valve[BF System Co., Ltd.] Specification Working pressure : 22MPa Temperature range : -40~125°C Material : Stainless steel Weight : 150g [Korean manufacturers/Korean suppliers/Korean products/Korean trade/Korean...

Read More Inquiry Now
BF-700 LPG Solenoid Valve

BF-700 LPG Solenoid Valve[BF System Co., Ltd.] Specification Operating fluid : LPG Endurance pressure : 6.75MPa Rated operating pressure : 1.8Mpa at 12VDC Operating temperature : -40~125°C Operating voltage : 7~16VDC Rated operating voltage : 12VDC Rated consumption power : 11W Flow orifice : 5mm Operating method : Pilot type Advantage This valve adhered LED at the coil part.(You can see the LED lamp of the energized valve) A mass flow pilot type solenoid valve. (Orifice : 5mm) The valve contained inner filter Compact design Easiness to replace filter This...

Read More Inquiry Now
Bf-C1200 NGV[CNG] Automatic Valve

Bf-C1200 NGV[CNG] Automatic Valve[BF System Co., Ltd.] Description This device automatically controls the NGV(CNG) fuel flow by electronic signal.For safety, automatic valve is installed between Cylinder and Reducer.It allows automatic fuel flow and fuel cut-off based on the usage of NGV(CNG) Specification Operating fluid : NGV(CNG) Endurance pressure : 35MPa Working pressure : 22MPa Operating Temperature : -40~125°C Rated operating voltage : 12VDC Rated consumption power : 20W Flow orifice : 5mm Operating method : Pilot type Body Material : Aluminum In, out...

Read More Inquiry Now
BF-300R GAS Injector Rail Set

BF-300R GAS Injector Rail Set[BF System Co., Ltd.] Gas Injector Module Designed ECE R110 Type 5BF03011 RAIL LPG/CNG INJECTOR 4cyl' set 5BF03012 RAIL LPG/CNG INJECTOR 5cyl' set 5BF03013 RAIL LPG/CNG INJECTOR 6cyl' set 5BF03014 RAIL LPG/CNG INJECTOR 8cyl' set [Korean manufacturers/Korean suppliers/Korean products/Korean trade/Korean...

Read More Inquiry Now
BF-300 Gas Injector[E8 110R-004626]

BF-300 Gas Injector[E8 110R-004626][BF System Co., Ltd.] Specification Material : SUS304, Brass Resistance (Ohm) : 2.2±0.1(Ohm)(at 20°C) Atmosphere temperature : -40~125°C Operating voltage : 7~15VDC Operating gas : NGV(CNG)/LPG Working pressure : 0~250KPa Dimension : Ø26x48x81(H) Weight : 0.2kg Advantage Precision : The injector is produced at the processing precision of 0.02mm. It can do control correct flow. Speed : This FAST type injector is applied with 2ohm Coil Resistance, so that it can injector gas much faster. Quietness : As applied with Noise...

Read More Inquiry Now
GAS Injection Nozzle[BF System Co., Ltd.]

GAS Injection Nozzle[BF System Co., Ltd.] The most optimized Gas Injection position. (No influence on the performance of Gasoline Fuel Injection) Easiest installation and Minimized installation space. No need additional Injection Nozzle work. Gas Injection Nozzle is designed not to have any influence of air flow. [Korean manufacturers/Korean suppliers/Korean products/Korean trade/Korean...

Read More Inquiry Now
BF-300 GAS Injecto[E8 110R-004626]

BF-300 GAS Injecto[E8 110R-004626][BF System Co., Ltd.] Specification Material : SUS304, Brass Resistance (Ohm) : 2.2±0.1(Ohm)(at 20°C) Atmosphere temperature : -40~125°C Operating voltage : 7~15VDC Operating gas : NGV(CNG)/LPG Working pressure : 0~250KPa Dimension : Ø26x48x81(H) Weight : 0.2kg Advantage Precision : The injector is produced at the processing precision of 0.02mm. It can do control correct flow. Speed : This FAST type injector is applied with 2ohm Coil Resistance, so that it can injector gas much faster. Quietness : As applied with Noise...

Read More Inquiry Now
BF-500 Gas ECU(E24 10R-020340)

BF-500 Gas ECU(E24 10R-020340)[BF System Co., Ltd.] Description LPG BI-FUEL ECU(BF-500) is the device to control gas supply to engine. LPG BI-FUEL ECU(BF-500) provides controls for engine parameter, various sensors, valve and etc. LPG BI-FUEL ECU perform various functions for control and safety. LPG BI-FUEL ECU(BF-500) can undertake full automatic mapping works in whole process through target mapping without manual mapping work.There is Scanner for extra mapping for user's convenience. This can be applied with all kinds of vehicle of T.B.I and M.P.I (including turbo type). For...

Read More Inquiry Now
BF-500 Gas ECU[E24 10R-020340]

BF-500 Gas ECU[E24 10R-020340][BF System Co., Ltd.] Description NGV(CNG) ECU(BF-500) is the device to control gas supply to engine. NGV(CNG) ECU(BF-500) provides controls for engine parameter, various sensors, valve and etc. NGV(CNG) ECU perform various functions for control and safety. NGV(CNG) ECU(BF-500) can undertake full automatic mapping works in whole process through target mapping without manual mapping work.There is Scanner for extra mapping for user's convenience. This can be applied with all kinds of vehicle of T.B.I and M.P.I (including turbo type). For safety, this...

Read More Inquiry Now
GAS Injection Nozzle[BF System Co., Ltd.]

GAS Injection Nozzle[BF System Co., Ltd.] The most optimized Gas Injection position. (No influence on the performance of Gasoline Fuel Injection) Easiest installation and Minimized installation space. No need additional Injection Nozzle work. Gas Injection Nozzle is designed not to have any influence of air flow. [Korean manufacturers/Korean suppliers/Korean products/Korean trade/Korean...

Read More Inquiry Now
BF-C1100 NGV(CNG) Filling Unit

BF-C1100 NGV(CNG) Filling Unit[BF System Co., Ltd.] DescriptionDue to the sleek and internal dynamic design of the filling unit (BF-C1100), chatter caused during the filling process is greatly reduced and maximum flow rate achieved. The Filling unit (BF-C1100) has an integrated check valve system designed to minimize the effect that dirt particles have on sealing components within the filling unit. Therefore, the Filling unit( BF-C1100) is a very durable unit, minimizing maintenance and downtime. Specification Operating fluid : NGV(CNG) Endurance pressure : 35MPa Working...

Read More Inquiry Now
BF-300 Gas Injector Rail Set

BF-300 Gas Injector Rail Set[BF System Co., Ltd.] Gas Injector Module Designed ECE R110 Type 5BF03011 RAIL LPG/CNG INJECTOR 4cyl' set 5BF03012 RAIL LPG/CNG INJECTOR 5cyl' set 5BF03013 RAIL LPG/CNG INJECTOR 6cyl' set 5BF03014 RAIL LPG/CNG INJECTOR 8cyl' set [Korean manufacturers/Korean suppliers/Korean products/Korean trade/Korean...

Read More Inquiry Now
BF-1000 NGV[CNG] Reducer[E8 110R-004698]

BF-1000 NGV(CNG) Reducer[E8 110R-004698][BF System Co., Ltd.] DescriptionThe main function of Reducer for NGV(CNG) is to lower high pressure to low pressure and to maintain as static pressure. Finally, reducer for NGV(CNG) provides regular and stable pressure of NGV(CNG) to the Injector.Reducer for NGV(CNG) to maintain stable durability has two-leveled pressure-drop stages. This reducer is produced after test which is 30MPa higher than actual Refueling Pressure. High pressure is dropped on 1st stage and it is dropped again on 2nd stage, which can prevent durability...

Read More Inquiry Now
BF-C1300 NGV[CNG] [BF System Co., Ltd.]

BF-C1300 NGV[CNG] Pressure Indicator with Level Guage[BF System Co., Ltd.] DescriptionGas pressure gauge is mainly used to measure the pressure of natural gas inside an automobile gas tank and lines. In addition it also transfers the measured value of the gas pressure into an electrical signal and sends it to the ECU(BF-500) in order to actually indicate the amount of gas inside the gas tank. Specification Operating fluid : NGV(CNG) Endurance pressure : 50MPa Working pressure : 0~40MPa Operating Temperature : -40~125°C Case material : SUS304 Bourdon pipe material : Brass...

Read More Inquiry Now
BF-200 Rail Filter with MAP Sensor

BF-200 Rail Filter with MAP Sensor[E8 110R-004641][BF System Co., Ltd.] Description Rail Filter (BF-200) is all new method. It has a distributor structure which supplies exact pressure to Gas injector(BF-300) of each individual cylinder. It has a pressure sensor inside to send a signal to E.C.U(BF-500) which controls injection based on gas pressure to make optimum engine performance. Also, it has a temperature sensor inside to control injection based on temperature. It has a gas filter to prevent incoming remnants through injector(BF-300) Specification Working pressure :...

Read More Inquiry Now
BF-100 LPG Reducer[BF System Co., Ltd.]

BF-100 LPG Reducer[BF System Co., Ltd.] We have developed this product to realize minimized size through innovative design works with strict test process Maximum Capacity (Gas Volume) Realization of perfect evaporation with water chamber positioned in the mid of gas pre-heater. Upgraded Capacity through the installation of inner gas liquid type chamber. Qualification to 6MPa pressure resist test and rubber material shock resist test Stable maintenance of regulation function through constant Quality Control Pressure recovery effect increase according to rapid speed...

Read More Inquiry Now

We are aimed to help Companies from South Korea to expand their Market Globally. We do Market Research, Buyers Data Sources, Global Marketing, Exebitions and Trade Shows, Global Trade Distribution, Infrastructure & Finding Global Partners on behalf of companies. We help korean companies to sell Made In Korea products from our stores. Get sign up to receive more updates from Best Made In Korea.

© 2022 Bestmadeinkorea. All Rights Reserved.