DW Series

  Usage It is possible to choose the flux depending on the model from 50cc/min to 35,000 cc/min and may be used for water processing of food waste processing factories, water and sewage, chemicals processing factories (fabric, acid processing, and plating), and waste processing sites where chemicals have to be inserted precisely. Pros compared to products of similar technology of other Korean and global companies ?  Sold over 40,000, it is a steady seller product series. ?  Our precise and solid designs enable using the products for over 10 years (only, it may differ depending on the environment used). ?  One can increase in parallel the pump heads and increase the flux depending on the number of pump heads (refer to Drawing 3). ?  Depending on the solution, one can choose the pump material between PVC, SUS304, SUS316, Teflon, and PVDF (refer to Drawing 2). ?  When separately adding a servo unit, it is possible to automatically control using the PH meter. ?  When parallel connecting the pump heads, the pulsation rate drops from 314 percent to 157 percent (refer to Drawings 1 and 3). Overall explanation of the products and their characteristics/specifications ?  A steady seller sold the most among our company’s products after launching the DW series.   ?  We have not changed the design for 20 years and are keeping the original model because it is well designed. As such, it seldom goes out of order and if the operator takes good care, the model is usable for over 10 years. ?  As a characteristic, the motor is usable for both three-phase 220v and 380v and its diaphragm metering pump enables selecting the head material from PVC, Teflon, PVDF, SUS304, and SUS316 depending on the solution used. Depending on the model, the flux may be adjusted from 50cc/min to 35,000cc/min. ?  (Only, when interlocking duplex heads, the flux increases twofold). Product specifications and models                          Discharged amount 50cc/min ~ 50L/min (when applying duplex head) Solution material PVC,SUS304,SUS316,Teflon, PVDF Motor Three-phase, 60Hz,220/380v, IP44 (basic) 440V, 50Hz, for an explosion and water proof motor, you need to place an order separately. Flux control Possible to adjust flux between 30 ~ 100 percent Viscosity Below 1000cp Usage temperature PVC material (0~50C), SUS (0~80C) Pipe connection method The flange type is basic and for a hose type, you need to place an order separately.