Thermal Shock Chamber

Thermal Shock Chamber For thermal shock test of components, submitting them to rapid temperature changes.Fast thermal response with continuous and linear control oven the whole rangeShorted temperature recovery time and temperature rise RS 232/485 data interface. Rapid cooling rate with low noise level Shortened temperature recovery time and temperature rise Vertical movement of basket with separate temperature zones Comprehensive safety system Reduced vibration impact Improved temperature distribution performance Compatible with MIL-STD-883 and other test standards Minimized air mixing between cold and hot chambers Amount of Zones 2-ZOne 3-ZOne Zone Type Elevator Type Damper Type Test space volume(L) 30mm 70mm 120mm 300mm 30mm 70mm 120mm 300mm Internal dimension W 300mm 400mm 700mm 750mm 300mm 500mm 600mm 750mm D 320mm 420mm 700mm 650mm 320mm 500mm 450mm 650mm H 320mm 420mm 800mm 650mm 320mm 600mm 450mm 650mm External dimension W 1,300mm 1,450mm 1,300mm 1,650mm 1,430mm 1,100mm 1,750mm 1,850mm D 1,650mm 1,850mm 1,100mm 2,000mm 1,320mm 1,000mm 1,450mm 2,000mm H 1,600mm 1,760mm 1,850mm 2,100mm 1,550mm 1,600mm 1,700mm 1,850mm Customized Dimension Different size of chambers are available on user's demand Test area High Temp. exposure range +60°C~+200°C Low Temp. exposure range -65°C~+0°C Temperature Fluctuation ±0.5°C Hot zone Pre-heat upper limit +230°C Heat-up time RT to +230°C within 30min Cold zone Pre-cool limit -75°C Pull-down time RT to -75°C within 90min Temp. recovery High temp. exposure : -150°C 15min, Low temp. exposure : -65°C 15min Temp. recovery time Less than 5minutes(specimen time.) Test Standard MIL-STD-883E, MIL-STD-202G, JIS C 0025, JASO D 001, EIAJ ED-2531A, IEC 60749-25IEC-60068-2-14 Na, IEC-961747-5 Na, MIL-202G, MIL-883F Temp. accuracy Less than ±0.5°C Refrigeration Unit Air-cooled condenser or water-cooled condenser Display 5.7" TFT color LCD display, Interactive input system using touch panel. Power Supply 200VAC 3Ø 3w 50/60Hz, 220VAC 3Ø 3w 60Hz, 380VAC 3Ø 4w 50/60Hz Option *Chart recorder. * Door locking system *Viewing window. *Customization available. *The size and the specification can be changed as customer's requirement