Test Equipment

Introduction 2 Axis Test Working Range- Rotary Act- Max Angle : ±50kN (±0.2%)- Torque : ±29.4N . m (±2.0%)- Linear Act- Max Load : ±20kN (±0.2%)- Max Displacement : ±50mm (±1.0%)- Proper Pressure : 21MPa- Working Chamber- Temp. Range : -50 ~ +120°C (±3°C) Application & Features - Fatigue Life Test- Endurance- Chamber System 1 Axis Test Working Range- Linear 1Ea - Max Load : ±20kN (±0.2%)- Max Displacement : ±50mm (±1.0%)- Hydraulic System - Proper Pressure : 21MPa- Working Chamber- Temp. Range : -50 ~ +120°C (±3°C) Application & Features - Fatigue Life Test- Offering Various Conditions Dynamic Fatigue Test Working Range- Linear 2Ea - Max Load : ±20kN (±0.2%)- Max Displacement : ±30mm (±1.0%)- Linear 1Ea - Max Load : ±20kN (±0.2%)- Max Displacement : ±50mm (±1.0%)- Gimbal 1Ea - Max Load : ±20kN (±0.2%)- Max Displacement : ±125mm (±1.0%)- Hydraulic System - Proper Pressure : 20.5MPa Application & Features - Bushing Fatigue Life Rheometer Working Range- Power : AC 220V 60Hz 2kW - Torque Range : 25, 50, 100Lb-in - Temp. Range : 100~ 200°C- Test Time : 6, 12, 18, 24, 30, 48, 60 Min - Disk Vibration : 100 cycle/min - Disk Angle : 1°C, 3°C, 5°C - Air Pressure : 5kg.Cm2 Application & Features - Comply with KSM 6687 - Vulcanization Characteristic CMM X : 600mmY : 600mmZ : 500mmResolution (µm) : 0.5Accuracy : 2.0 + (L/300)µmHi-Vision System : x10/x30 MTS Working Range- Force : ±12 ~ ±25,000N - Displacement : ±0.0005 ~ ±20mm- Max Frequency : 700Hz - Pressure System - Proper Pressure : 21MPa Application & Features - Dynamic Rate, Static Rate - Variety Rate, Check Frequency - Short Fatigue Test- Computer Control System