Combi TDR for Optic & Metallic Cables

Introduction NanoTronix Combi TDR (Model No.: OMTDR-1000) is a compact and lightweight handheld Optical Time Domain Reflectometer (OTDR) with integrated Metallic Time Domain Reflectometer (MTDR) in one unit to be used for either optic fiber or metallic cable network The OTDR mode can be used for analyzing the physical condition of optical fibers in the installation and maintenance of optical communication networks. It provides users with the complete information on the attenuation and reflective or non-reflective loss of optical fibers so as to locate faults, connectors and splices along the fibers. The MTDR mode is suitable for installation, maintenance and fault-finding (complete open & short, partial open & short, loading coils, loose connection, broken lines etc.) of metallic cables such as CATV, CCTV, Coaxial cables, Power cable, Telephone line and UTP cable whatever consists of at least two conductors. NanoTronix Combi TDR (Model No.: OMTDR-1000) will provide network installers and maintenance personnel with a complete solution for testing, troubleshooting, certifying and documenting the mixed network (especially LAN, CATV, HFC and FTTx networks) in any industrial sites. Features Two in one OMTDR (mini OTDR + MTDR) 1310/1550nm Realtime measurement One button scan 6.4” TFT Color LCD display Easy to use, Lightweight and compact PC software for further analyzing, reporting and printing Rugged and waterproof packing Optional spare battery double operating time Extremely economical multi purpose TDR for both optic cable and copper cable Specification     Nou-2x Nou-3x Optical specifications(OTDR mode) Dynamic range 20dB or (34/35)dB 34/32dB Measurement range 100km Minimum display resolution 10cm Distance accuracy ±10cm ±0.1% of reading < 100m±0.1% of reading > 100m Attenuation detect accuracy ±0.1dB Pulse widths 40ns, 100ns, 200ns, 500ns, 1us, 2us, 5us, 10us  10ns, 40ns, 100ns, 200ns, 500ns, 1us, 2us, 5us, 10us Average time 15s, 30s, 1min, 2min, 3min real time Attenuation deadzone 30m  18m/18m Event deadzone 15m  5m IOR 1.0000 ~ 1.9999 (in 0.0001 step) Wavelength 1310/1550 Fiber type Single-mode Connector type FC/PC Maximum data storage capacity 50 waveforms Metallic specifications(MTDR mode) Measurement range 3.2m ~ 20,000m (10.4ft ~ 65,000ft) for Coax * Maximum testable cable length will vary with pulse width and cable type. Minimum display resolution 10cm Distance accuracy ±0.1% of reading ±0.1m for Coax * Accuracy will vary with VOP of cable being tested. Pulse width 5ns,15ns,45ns,100ns,200ns,500ns, 1us, 2us, 5us,10us Input bandwidth 300MHz Effective sampling rate 1GS/s VOP(PVF) Variable from 30.0 to 99.9% (in 0.1% steps)V : 90 to 300m/us V/2 : 45 to 150m/us Output impedance Automatic output impedance control of 25 ,50, 75, 100, 125 & 150 ohm Gain 0 to 66dB or better, maximum sensitivity 1mV (full scale) Test Mode L1, L1&M, L1-M, M Connector type BNC female Maximum data storage capacity 100 waveforms General Specifications Display Type 64" Color TFT LCD Internal Memory 4MB Communication port RS-232C  USB Power Supply 7.6V, Li-ion chargeable battery pack 8,800mAh / AC adapter Battery Life 5 hours (extendable up to 10 hours by using extra spare battery) Recharge time 6 hours Adaptor intput Voltage : AC 110 ~ 240V (auto adjusting)Frequency : 50/60Hz (auto adjusting) Adaptor output Voltage : DC 15V (+5%)Current : Max.1A Operating Temperature -10°C(+14°F) ~ +50 °C(122°F) Storage Temperature -20°C(-4°F) ~ +70 °C(158°F) Relative Humidity <95% Net Weight 2.7kg(5.9lbs) Dimensions 267mm(10.5") x247mm(9.7") x 127mm(5") Applications NanoTronix Combi TDR (Model No.: OMTDR-1000) can be applicable for both optic and metallic cable by interchanging of OTDR mode or MTDR mode OTDR mode Optical cables FTTx and HFC Fiber-to-the-Curb(FTTC) Fiber-to-the-Home(FTTH) Fiber-to-the-Premises(FTTP) Fiber-to-the-Office(FTTO) MTDR mode Metallic cables Coaxial cables Telephone cables UTP cables Electric power cables