MD-Pump

Vacuum Pump MD-PUMPBased on VMECA Vacuum Cartridge Series MDMax vacuum level : -92kPa (-27.1 inHg)Max flow rate : 341 NI/min (12.04 scfm)Supply air pressure : 3~6bar (43.5~87 psi), max 7bar (101.5 psi)Air consumption : 97~152 NI/min (3.4~5.4 scfm)Supply air type : Dry compressed airWorking temperature : -20°C to + 80°C (-4°C to + 176°F)Noise level : 50~60 dBA Series MDLMax vacuum level : -75kPa (-22.1 inHg)Max flow rate : 362 NI/min (12.8 scfm)Supply air pressure : 4~6bar (58~87 psi), max 7bar (101.5 psi)Air consumption : 70~104 NI/min (2.5~3.7 scfm)Supply air type : Dry compressed airWorking temperature : -20°C to + 80°C (-4°C to + 176°F)Noise level : 50~60 dBA Main advantages Located at or near the point of use thus reducing system volume, increase and reducing cycle time. Compact in size and light weight. Maintain vacuum despite fluctuations and drops in air pressure. VMECA Twofold Silencer(PT) assures low noise levels (about 30% lower than conventional silencer) Adjustable exhaust direction. Optional Air-saving kit(AS-KIT) available to minimize energy consumption. Optional factory installed air control / vacuum release valves and vacuum switch available. Easily mountable and interchangeable vacuum cartridge.(save the maintenance time) Series MD High vacuum level -92kPa(-27.1 inHg) at low compressed inlet air pressure (3~6bar / 43.5~87 psi) High vaccum flow rate to compensate for fluctuating or low compressed air pressure. Suitable for sealed system applications such as lifting metal sheets or glass plate. Series MDL Vaccum level of -75kPa(-22.1 inHg) at general inlet air pressure of 6 bar (87psi). Extra high vacuum flow rate and suitable for non-sealed system applications.