Deliquescent Air Dryer

Feature of the pistonMate Series After cooler + Oil & water separator + Deliquescent dryer + Filter + High liquid level warning horn + Bypass pipe Minimum pressure dew point -4°C (-25°C at atmosphere) Oil removal feature 5µm particle removal filter Pulsartion block function through small piston compressors Low initial investment & maintenance costs Does not require separate pipe work Minimal pressure loss (less than 1%) Uses non-toxic desiccant (eco-friendly desiccant) Overcomes limitations of installation site (outdoor installation at temperatures of -20°C possible) PistonMate Specifications Sepcification Flow Dimension Weight In/Out Initial filling volume of desiccant Consumption volume of desiccant Cooler Model Nm3/Min L x W x H(mm) kg mm kg kg (V/Ph/Hz) PistonMate 50 0.65 560 x 620 x 1,245 46 15A 23 12 220/1/50~60 PistonMate 75 0.98 560 x 620 x 1,245 48 15A 27 17 220/1/50~60 PistonMate 100 1.3 650 x 750 x 1,315 72 20A 52 24 220/1/50~60 PistonMate 150 1.95 650 x 750 x 1,415 76 20A 68 37 220/1/50~60 Annual average inlet temp. 24°C or less at operating pressure 7 kg/cm2 & operating time 15 hr/day (Max. inlet temp. 38°C) Design pressure 9.9 kg/cm2, Maximum operating pressure 9.0 kg/cm2 (If pressure of 10 kg/cm2 or higher is required, customized units are available) There Specifications may be modified to improve quality. Deliquescent air dryer was designed to drain out a condensate water manually inside of vessel. Auto drain valve EDV15 can be supplied by optional requirement for user convenience only. Deliquescent air dryer desiccant (DOL, SP) should be protected from oil through the filter(0.01µm), When an oil comes into desiccant bed, the desiccant performance may not be guaranteed. Flow Diagram Maximum exit temperature of 65°C from the receiver tank of the piston compressor Maximum exit temperature of 38°C from after cooler, a lot of water mist produced. Water & oil mist removed Non-powered deliquescent dryer using Dry-O-Life(DOL), Below 55%RH, Min. PDP -4°C ISO8573-1 ll, lll class compressed air 5µm particle removal filter installed, removes desiccant dust and particles