BDX Series

Deliquescent Air Dryer  AIRMATE Series - (Single Tower) Features of the BDX Series Consist of integrated cooler + deliquescent dryer + filter + bypass pipe Minimum pressure dew point -4°C (-25°C at atmosphere) Oil removal feature * 5micron particle removal filter Low initial investment & maintenance costs Does not require separate pipe work * Minimal pressure loss Uses non-toxic desiccant (eco-friendly desiccant) Overcomes limitations of installation site(Outdoor installation at temperatures of -20°C possible) Added Cooler Bypass Pipe (Convenient repair and replacement due to the freezing and bursting of the cooler during winter) Flow Diagram Maximum exit temperature of 65? from the receiver tank of the compressor. Maximum exit temperature of 38? from after cooler, a lot of water mist produced. Water & oil mist removed Non-powered deliquescent dryer using Dry-O-Life(DOL), Below 55%RH, Min. PDP -4? ISO8573-1 ll, lll class compressed air. 5? particle removal filter installed, removes desiccant dust and particles. BDX Specifications Specification Flow Dimension weight In/Out Initial FillingVolume ofDesiccant Consumption volumeof Desiccant Cooler Model Nm3/min L x W x H (mm) kg mm kg kg V/Ph/Hz BDX005-AC 0.65 600 x 670 x 1,253 63 15A 23 12 220/1/50~60 BDX007-AC 0.98 600 x 670 x 1,253 63 15A 27 17 220/1/50~60 BDX010-AC 1.3 650 x 763 x 1,423 97 20A 52 24 220/1/50~60 BDX015-AC 1.95 650 x 763 x 1,423 97 20A 68 37 220/1/50~60 BDX020-AC 2.6 720 x 820 x 1,560 165 25A 100 55 220/1/50~60 BDX030-AC 3.9 800 x 950 x 1,743 203 25A 163 94 220/1/50~60 BDX057-AC 6.5 1,000 x 1,080 x 1,776 328 40A 227 137 380/3/50~60 BDX100-AC/HC 13 1,420 x 1,340 x 1,837 481 50A 322 243 380/3/50~60 BDX150-AC/HC 19.5 1,728 x 1,390 x 1,783 635 65F 513 350 380/3/50~60 BDX200-AC/HC 26 1,750 x 2,136 x 1,861 835 80F 644 487 380/3/50~60 BDX300-AC/HC 39 2,000 x 2,100 x 2,102 1,000 100F 1,026 670 380/3/50~60 BDX400-AC/HC 52 2,300 x 2,100 x 2,653 2,160 100F 1,540 972 380/3/50~60 BDX600-AC/HC 78 2,730 x 2,400 x 2,975 2,565 125F 2,090 1,458 380/3/50~60 BDX800-AC/HC 104 3,081 x 2,410 x 2,927 3,130 Option 2,630 1,944 380/3/50~60 BDX1000-AC/HC 130 3,635 x 2,380 x 3,234 3,256 Option 3,270 2,430 380/3/50~60 BDX1200-AC/HC 156 3,708 x 2,821 x 3,008 3,775 Option 3,990 2,916 380/3/50~60 Annual average inlet temp. 24°C or less at operating pressure 7 kg/cm2 & operating time 15 hr/day (Max. inlet temp. 38°C) Design pressure 9.9 kg/cm2, Maximum operating pressure 9.0 kg/cm2 (If pressure of 10 kg/cm2 or higher is required, customized units are available) Deliquescent air dryer was designed to drain out a condensate water manually inside of vessel. Auto drain valve EDV15 can be supplied by optional requirement for user convenience only Deliquescent air dryer desiccant(DOL, SP) should be protected from oil through the filter (0.01µm), When an oil comes into desiccant bed, the desiccant performance may not be guaranteed. Dimension