Basically, the ANJINTECH Separator is a screening device that vibrates about its center of mass. Vibration is accomplished by eccentric weights on the upper and lower ends of the motion-generator shaft.
Rotation of the top weight creates vibration in the horizontal plane, which causes material to move across the screen cloth to the periphery.
The lower weight acts to tilt the machine, causing vibration in the vertical and tangential planes.
Speed and spiral pattern of material travel over the screen cloth can be set by the operator for maximum through put and screening efficiency of any screenable product... wet or dry... heavy or light, coarse or fine, hot or cold.
Features:1. Widest range of materials screened.
ANJINTECH separators can handle such a broad range of materials… wet or dry, fine or coarse, heavy or light. Particles as fine as 400mesh can be screened at high production rates.
2. Single or multiple separations.
As many as five screen decks can be incorporated in one ANJINTECH separator, providing simultaneous separation into five fractions.
3. Longer screen life
Each screen cloth is held in uniform tension by drawing it taut on tension rings. The drum-tight screening surface vibrates freely without whipping against rigid supports, greatly reducing screen wear and increasing screen life.
4. Less space required.
For equivalent capacity, ANJINTECH avalanche separators require less working floor space than other screening systems.
5. Economy-long life, less power, low maintenance.
Spec: ABTS 200-1500
l Material : Trough - sus304
Body - ss400
l Motor : 0.75kw–1.5kw
l Screen : 0–400 mesh
l Deck : 1–5 deck
Share TWIST SCREEN in Social Media