-
FESTEC’s 3 Meter Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is important to measure the smoke generation from the evalue of light source
-
=Digital Pocket ORP Tester DMT-40=
The pocket ORP tester is an inexpensive pocket type tester which is simple to operate ideal for monitor ozone system, Aquarium & Aquaculture monitoring, Water purification & Drinking Water, Water pollution
-
HCF-NEK606 is an equipment that can decide whether power lines or control lines used in the coast, ships and refineries are resistant to high heat that may be caused by oil or
-
Functions
1.Support Bosch, Delphi, Denso, Siemens, Piezo type CRDi injectors)
2.Max 800bar
3.Embedded variable spray pattern
4.Manual control mode
5.Automatic pressure mode
6.Adjustable spray time by 230us~2000us
7.Resistance test
8.Diagnosis of damaged coil in injectors
9.Air suction
10.Spray counter
11.Automatic test-oil
-
This equipment virtually simulates an external fire to evaluate the resistance of the roof and other physical elements of fire, in order to qualify for the flame spread experiments (A~C class), in case of A 1.82m, B 2.4m and C 3.9m. It is equipment to displacement of the testing material and the exposure and falling of the roof
-
Detailed Product Description
GSM ICS Module for GSM ICS Repeater.
GSM ICS Module has followings key features;
•Supports 900MHz GSM Band
•GSM1800/1900, CDMA450/800/1900, WCDMA2100, LTE 700/900/1800 Band also Available
•DL : 0 dBm, UL : -5 dBm Output
•Cancellation Range : G=I+15 dB
•Built in LNAs both Downlink & Uplink
•Internal
-
FESTEC’s Building Construction Fire Resistance Tester measures the performance of construction material against standard fire conditions, and satisfies the general requirements, vertical history section material, vertical non-history section material and the fire-proof door’s fire proof testing.@ This equipment tests about the walls, doors,
-
Detailed Product Description
Distribution by CAT-5 UTP cable features low installation cost...
UTP distribution system consist of MHU(Master Hub Uint), UMU(UTP Mainhub Unit), EHU(Expantion Hub Unit), ERU(Expantion Remote Unit). Distribution by CAT-5 UTP cable features low installation cost. Digital distribution technology allows uniform cable
-
FESTEC’s Fire Resistance Assemblies Tester is included in both the IEEE 1202 and IEEE 383 standards. This test method is proceed in a chamber with a set volume for 20 minutes. During the 20 minutes, a sample cable is ignited with theoretically 20kW(70,000Btu/hr) flame using an ignition source fixed in a vertical position. This equipment
-
GSM ICS Repeater
GSM ICS Repeater has followings key features ;
•Supports 900 MHz GSM Band
•GSM 1800/1900, CDMA 450/800/1900, WCDMA2100, LTE 700/900/1800 Band also Available
•Output Power DL : 40 dBm, UL : 30 dBm
•Cancellation Range : G=I+15 dB
•Auto Gain Control , Auto Shut Down, Auto Isolation Check & Gain Setup
•AC 100–240V
-
Thermal Radiation Resistance Tester of full face mask measures exposure radiation from radiation heat resource and evaluates leakage of mask and either valve works or
-
Microwave Repeater enhances BTS coverage where BTS signals is not present or optic cable is not available.
Microwave Repeater has following key features ;
•Supports 800MHz CDMA & 2.1GHz WCDMA Simultaneously
•Link MW Frequency : 12 GHz
•Max. Link Distance : 2 Km
•Max. RF Output : 2W / 800 MHz, 5W / 2.1 GHz
•One Donor Unit Can
-
Full Face Masks Flame Resistance Tester is test when full face mask’s class 2,3 (follow up KIF’s standard) is exposed on the flame, check for either burn on the parts of full face mask or keep burn over 5 second after without
-
WCDMA ICS Repeater enhances BTS coverage for Small Office and Home Applications.
WCDMA ICS Repeater has followings key features ;
•Supports 2.1GHz WCDMA Band
•GSM 900/1800/1900, CDMA 450/800/1900, LTE 700/900/1800 Band also Available
•DL : 10 dBm, UL : 13 dBm Output
•Cancellation Range G=I+10 dB
•Built in Donor and Service
-
Introduction
The CRDi injector Testing & Cleaning /Piezo injector Testing.
Product Features.
1.Testing the uniformity of the common rail injector
2.Various brand name injectors (Bosch, Delphi, Denso) Testing.
3.Testing for injection figures.
4. can be fuel line cleaning & testing of Bosch/Delphi Injectors of all common rail diesel
-
This surface of the material spread flame tester (ISO 9239, Flooring Radiant Panel Tester) is test method that formal reflected spread of flame on flooring material back-draft condition when fire on building happened flame at compartment or room adjacent, or high temperature gas radiated to flooring surface a hot radiation heat accumulated at
-
General Infomation
In the ultra-precision industry such as metallic meterials and semi-conductors, importance
of surface treatment technology to protect and strengthen the surface layer has been widely
on the rsie.
Performance of thin-film coating is largely influenced by the property of matter of the thin-film
and adhesiveness of
-
Introduction
Summary Heat treatment device to increase strength and hardness by heat treating injection molded plastic
Test items
1. Assessment of plastic strength
2. Assessment of plastic hardness
3. Assessment of plastic abrasion resistance
Assessment items
1. Heat treatment of plastic in the combination parts of
-
45 Degree is used to evaluate compliance of fire-retardant products with fireretardant performance standards according to the combustion method, and measures combustion characteristics such as After Glow and After Flame of test specimen installed at a 45-degree angle.
FESTEC 45°Flammability tests After Flame Time and After Glow Time of specimen
-
Features
Real-time smoke measurement(%, k [m-1])
Portable and LED display
Outstanding accuracy, stability and durability
Response time of 0.5 second
Smoke, SOF measurement
Easy to use with handheld terminal(option)
Built-in printer(option)
RS232C PC program
RPM/ Oil temp. meter(option)
Auto-Zero/ Span calibration function