-
Kedron is a leading manufacturer of engineering thermoplastic compounds located in Korea
Under the trade name of Kedron® for automotive, electrical component, and home electrical appliance industries.
Long fiber thermoplastic (LFT Composites) pellets demonstrate glass fiber dominant property improvements across the board. Impact, tensile and
-
This paint was produced with two-types of modified silicone resin and urethane resin. As this paint dries fast, it is suitable for spraying on the back of decoration glass of home appliances and buildings. By overcoming the problems of existing glass paints, moisture-resistance and scratch-resistance, this product is good in terms of
-
Introduction
In case of the ``one-touch pipe connector,’’ we changed its metal pipe connector and warm water distributor to plastic engineering product, so this piping material changes the construction culture with economic and effective work.
1. Metals tend to corrode and cause water leakage, so we prolonged the life of buildings.
-
LIPB Horn (20KHZ, 1Wave) for Lithium Ion Polymer
-
The following products are handled by our Department. Please Contact Us with follow information if you have an interest to purchase these products.
PP, HDPE, LDPE, LLDPE
1) Brand
2) Grade No.
3) Quantity
4) destination
5) Payment
-
FLOWMIX 3000v
*Usage
For ultra-fluid concrete Reduction of bleeding and separation
Port constructions Underwater concrete constructions
*Features
Good adaptation to various temperatures Economic (small amounts are required)
May be used along with other
-
We have acquired 1,022 patents, trademarks and registration of designs in 68 countries and have grown up as a remarkable global brand exporting to 100 countries all over the world.
Product Category Available:Plastic/Glass Air-tight Food Container - BIS-free
Ceramic Tableware
Glassware- Goblet, Winr,Liquer, Champagne,Sherry, Tumbler, Shotglass,
-
Transparent resin with superior impact resistance and weatherproofness
Overview
The material shows excellent dimensional stability with low contractive efficiency and absorbing property.
It also shows superior strength, electrical property and impact resistance especially.
Features
01. Impact resistance
- More than 250 times impact
-
FLOWMIX 3000S
*Type : Standard
*Major Composition : Polycarboxylate
*Usage
High-fluidity and high-strength concrete Structure construction requiring high-density Skyscraper constructions
*Features
Reduced input water per unit Improved functions and sealing properties Minimum slump loss Salt free, low-alkali
FLOWMIX 3000R
-
SH-, SU-, SE- Series films are the transparent high gas-barrier films for food packaging. Nano-silica material is coated on base plastic films such as PET, OPP, OPA (Nylon), and hence the penetration of gases like oxygen or moisture is minimized. These SH-, SU and SE- Series high barrier film can be applicable to the food packaging, pharmaceutical
-
It is an excellent extreme high/low temperature resistant plasticizer being used in PVC, leather, cable wire, film, seats.
Furthermore, it has comparatively strong floating and dispersing effect that enabled it to be used as a solvent for agrochemicals.
Features:It is an excellent extreme high/low temperature resistant
-
Introduction
In case of the ``one-touch pipe connector,’’ we changed its metal pipe connector and warm water distributor to plastic engineering product, so this piping material changes the construction culture with economic and effective work.
1. Metals tend to corrode and cause water leakage, so we have prolonged the life of buildings.
-
Anode / Cathode Horn & Anvil (40KHz) for Lithium Ion Battery
-
Detailed Product Description
1. Biodegradable (PBC)
2. Food Tray
3. PBC (Poly Bio Calcium Carbonate) made Disposable
4. Eco Friendly food trays.
1. Biodegradable (PBC)
2. Food Tray
3. PBC (Poly Bio Calcium Carbonate) used tray
4. Mineral Degradable Polymer Bio Ceramic
New Bio Injection/Extrusion resin material used
-
FLOWBOND PVA
*Type : Multi-use adhesion agent
*Major Composition : Poly-Vinyl-acetate
*Usage
Adhesion of concrete Repair work Mortar adhesion surfaces Constructions requiring adhesions such as tile, slate and gypsum boards
*Features
Improved workability and adhesion properties Improved resistance against friction Improved workability
-
Product
Made in three colors: red, blue and ivory, the surface of the ocarina is glaze coated to leave no
stains.
The holes are made small so anyone can easily play it.
Pros: Made in three colors: red, blue and ivory, with the surface glaze coated, it leaves no stains
and has small holes so that anyone can easily play it.
Specifications:
-
Introduction
Product Details
Type
Garden Greenhouses
Place of Origin
Seoul, South Korea
Brand Name
Hobby Gardener
Model Number
GH46, GH48, GH410
Frame Material
Plastic
Plastic Type
Polycarbonate
Frame Finishing
PVC Coated
Feature
Easily
-
Overview
PTFE is the most representative fluoric resin (PTFE, PCTTE, PFA, PVDF – 60% of all fluoric resins(Teflon)) and having very unique properties showing superior heat / low temperature / chemical / friction / adhesion resistance along with excellent electrical property.
The material is widely used for the applications that require
-
FLOWMIX 2000S
*Type : Standard
*Major Composition : High molecule naphthalene Polymer
*Usage
Low-crack concrete High-durability concrete Normal and high-strength constructions
*Features
Good fluidity Increased durability and water tightness Good strength Minimization of slump loss Construction of non-compact concrete
-
SH-, SU-, SE- Series films are the transparent high gas-barrier films for food packaging. Nano-silica material is coated on base plastic films such as PET, OPP, OPA (Nylon), and hence the penetration of gases like oxygen or moisture is minimized. These SH-, SU and SE- Series high barrier film can be applicable to the food packaging, pharmaceutical