-
* The P-5C Particulate Monitor performs continuous, non-extractive mass concentration measurements-simply and reliably-in a wide variety of applications.
* Single-ended, Self-aligned Instrument: Mounts to standard ASA flange with no requirement for alignment or opposite wall access, resolution in low installation costs.
* Ready to Operate:
-
=Digital Pocket Dissolved Oxygen Tester DMT-50=
Finally it is available, a pocket dissolved oxygen tester, allowing fast and quick measurement of DO in any water source, great for aquaculture, aerobic bacteria respiration measurement, a must for
-
=Digital Pocket ORP Tester DMT-40=
The pocket ORP tester is an inexpensive pocket type tester which is simple to operate ideal for monitor ozone system, Aquarium & Aquaculture monitoring, Water purification & Drinking Water, Water pollution
-
Introduction
Continuous online monitoring and control for any aqueous solution to accommodate a range of sensors
Description
The SS (Suspended Solids) analyzer (DWA-3000A-SS) Wall mount microprocessor has been built
and designed to provide years of trouble free operation.
It is designed to be mounted on the wall or pipe stanchion.
This SS
-
Available for thermal conductivity measurements using Seebeck coefficient, four point probe and thermal conductivity 3W methods
Special Features
Thermal conductivity measuring system with vacuum chamber using Seebeck effect.
Equipped with TE cooler.
Various sample size adopted with order-made jig.
Programmable heating & cooling
-
Field emission test using Si tips and CNTs, etc Emitter characteristics evaluation CNT LCD backlight evaluation Soldering in vacuum
Special Features
Field emission reliability test system with high vacuum chamber for R&D.
Customer-ordered probe station.
Appropriate design for a variety of field emission measurements.
Specification
-
Field emission test using Si tips and CNTs, etc
Emitter characteristics evaluation
CNT LCD backlight evaluation
Special Features
Field emission test system with high vacuum chamber for R&D.
Customer-ordered probe station.
Appropriate design for a variety of field emission measurements.
Specifications
Wafer capacity 1 ×
-
· Use : 1.This sensor is used in water flow sensing. 2.This sensor has application to gas boiler and instantaneous warm-water appliance and water filtering appliance. · Features : 1.This sensor has excellent character in low pressure. 2.The out pulse frequency has linear character in flux change. This sensor has a half-permanent life by high
-
Features
The Life and Technology Incorporation delivers the nondestructive quality estimation technology
and the line of machine for sorting, washing, and drying. We were acknowledged for the
development of the mechanical visual sorting system in 2000, the camera autosorting garlic
peeling system in 2001, the nondestructive sorting system in
-
Specificaitons
- Input Voltage : AC220V
- Output Voltage : AC220V
- Rated Power :7.7kW
- IP Rating : IP44
- Charging Time: 4 ~ 6 hours
Features
- Charging Time : 6~7 hours
- 10.4" LCD IR type Monitor
- Sending charging status through CDMA
- Protection
: Over Heat / MC Error / Over Current / Over Voltage / Under
-
-
Specifications
- AC Input power : 380VAC, 3 Phase, 60Hz
- DC Output voltage : 500V
- DC Output current : 0A ~ 100A
- Rated Power : 50kW
Features
- Quick charge : Charge EV to 90% in 25 minutes
- Space saving
- Sending charging status through CDMA
- 15" LCD IR type Monitor
- Protection: Heat Sink Over Heat / MC Error / Over Current /
-
Detailed Product Description
Best solution for measurement and control of liquid level.
We guarantee your level best.
Since established in 1993, our indomitable enthusiasm and challenging spirit for developing world-class products turned out the extremely precise liquid level measurement sensors.
The general purpose mini float level
-
[Product Description]:
Revolutionary 3D Measurement & Inspection Technology
Aspire 2 is the only 3D SPI system (3D Solder Paste Inspection System Main features) that provides a complete solution to the common bottlenecks that hinder conventional Inspection systems. Koh Young’s innovative technology provides true, accurate 3D
-
Doctor Pulse: Vascular health index and stress gauge device :
Pulse measurement and analysis by illuminating the finger blood vascular health and cumulative stress measurement
Features:
● Vascular health condition and the index measurement
● Measurement of Average pulse
● Vascular
-
The equipment automatically and periodically measure property values constant temperature chamber without manual process by implementing constant temperature chamber and measuring instrument for evaluating reliability of high output LED unit and module.
Reliability test
ㆍDurability test: Measure properties of
-
Measure all performance items necessary for KS and certification. High performance and low cost equipment (Patent registration in progress)
floor plan
Measuring
-
Measurement for base data of optical and electrical conversion efficacy to figure out which electrical signal detector such as solar cell outputs for radiance exitance or illumination by each wavelength.
Key features
ㆍMeasuring targets : Solar cell, silicon and optical diode
ㆍChannel : 4ch auto
-
I-V CURVE meter dedicated to solar cell. Current measurement for various types of solar cell : Measure polarizations for 20A Measure Series resistance Rs, and parallel resistance Rsh
Key features
ㆍI-V CURVE meter dedicated to solar
-
Detect find crack of solar cell module-EL tester. Test efficacy among Cells/Strings of solar modules, Patented light source- Transferred technique from KRISS
Measuring items
ㆍDetect find crack of solar cell module - EL tester
- Imagery interpretation by infrared ray : 1sec / cell
- Detect fine crack: