-
Introduction
CONCRETE VIBRATOR (DDV50, DDV130)
- Developed for placing concrete in constructions
- Utilizes 7000 vpm high frequency vibration of hydraulic type
- High vibration bar can convey strong vibration into the ground
- Apply to dam project and concrete
-
Introduction
We are high quality undercarriage parts maker like Track Link Assy, lower & upper rollers, Idlers, Sprockets in Korea.
we have the undercarriage parts -C/Roller, T/Roller, Sprocket, F/Idler and etc for the following models
- KOMATSU,PC and D series
-HITACHI, EX and UH series
-KOBELCO, K and SK series
-MITSUBISHI, MS
-
Introduction
Unique design for faster penetration rate
Minimizing service requirements due to simple design
Premium grade of carbide inserts
TDEX System
Model
No.of
Wings
Bit Diameter(mm)
Casing Size(mm)
Applicable
Hammer
Expended
Retracted
I.D.
O.D.
Wall
SW
-
1. Company Introduction
1) Brand : HAMMERS CO., LTD.
2) Products
- Hydraulic Hammer / Rock Breaker / Jack Hammer
- Demolition Attachments(crusher, shear, compactor, quick coupler, scrap grapple/grab, wood grapple, clam shell grapple)
3) HAMMERS Hydraulic Breaker Features
- Quality : Narrow variation on good quality due to using the 100%
-
Pneumatic hose connection part
Spac:
-
Introduction
AUGER DRILL (DAD SERIES)
- Applied for ground release drilling, ground investigation
- Much deeper drilling is possible with extension boom mounting
- Utilizes crusher hydraulic line
- Easy mounting and dismounting on 5~45ton Excavator
-
Introduction
We are also a manufacturer and supplier for hydraulic Rock Drill Drifter parts for Hydraulic crawler drill, Jumbo drill and the those good quality drifter parts of Atlas Copco, Tamlock, Furukawa, Soosan, Toyo, and Ingersoll-rand have been supplied to many customers in Canada, Brazil, Mexico, America, and Middle East &
-
Introduction
Designed for harder structure on pilot bit
Premium grade of carbide inserts
Easier to assemble and disassemble
TREX System
Model
Bit Diameter(mm)
Casing Size(mm)
Applicable
Hammer
Expended
Retracted
I.D.
O.D.
Wall
TDEX
-
HAMMERS CO., LTD.
1. Model : HEB80H
2. Type : Side type for (18 ~ 26 ton class)
3. Basic Trade Term
1) Basic Accessories : Working Demolition Tool * 2 pcs, Hydraulic Hose 1 Set(2lines), Nitrogen Gas Tank * 1 Bottle, Gas Charging kit * 1 Set, Maintenance Kit * 1 Set, Manual Guide Book(1ea)
2) Payment Term : Half payment(50%) in advance, The
-
Rock splitting products
Features: 20mm, 32mm
Spac: weight 1kg, light
-
Introduction
Symmetrical overburden drilling system
Designed with bits extended out when drilling the hole.
Reduce replacement cost of wing bit due to relatively longer life of wing bit
NT System
Model
No.of
Wings
Bit Diameter(mm)
Casing
-
Introduction
We are also a manufacturer and supplier for hydraulic Rock Drill Drifter parts for Hydraulic crawler drill, Jumbo drill and the those good quality drifter parts of Atlas Copco, Tamlock, Furukawa, Soosan, Toyo, and Ingersoll-rand have been supplied to many customers in Canada, Brazil, Mexico, America, and Middle East &
-
Introduction
Supplying other shank bits as well as TD design shank
Supplying oversize drill bits and custom design bits
Standard DTH Bits is a standard grade of carbide inserts
Premium DTH is a premium grade of carbide inserts
Bit Face Design - Flat Face / Concave Face / Convex Face / Double Step Face
DTH Bits
-
Main features of GB vibro hammer include;
- 360 degree rotation
- 90 degree tilting rotation of jaw foe face working
- Tilting structure can be detatchable and attachable easily
- Seperate vibration-proof rubbers are equipped for cost efficiency
- Easy replacement of bearing
- Simple replacement of tooth of
-
The Support Leg is designed to match ideally with this type of drill so that the drill will fully display its performance. Made of super duralumin, the leg is light in weight and easy to handle.
Features: Light support Leg Providing Stable Feed Pressure
Spac: weight 15kg,
-
Introduction
TDU Hammer Specifications
Model
Button Bit
Standard Range
(mm)
Shank Type
Connection
Outside
Diameter
(mm)
Length
w/o bit
(mm)
Weight
w/o bit
(kg)
TDU40
105~127
TDU40
API 2 3/8
Reg. Pin
98
917
37
TDU50
130~152
TDU50
API 3
-
Introduction
Hydraulic Breaker Chisels and tools.
All of our Chisels( Breaker tools) are made of Korea origin steels .
Hydraulic Breaker Tools / Chisels / Hammers (Krupp, Rammer, Indeco,Montabert, Atlas Copco, Stanley, Furukawa, NPK, Toyo, Toku, Okada and including all Korean
-
Introduction
Economic Solution for soft &medium soil formation
Screw Hammer Specification
Model
Hole Size
Standard Range
(mm)
Combined
Hammer
Bit
TDS 400
350 ~ 400
ACE80
203mm (8")
TDS 500
400 ~ 500
TD100
254mm (10")
TDS 600
500 ~
-
Strong points of GB hydraulic hammer include;
Easy operate under severe qorking environment
High quality of raw materials
Low repair cost
Stable quality through strict heat treatment and tolerance
Wide range of quality
-
Toyo rock drill to produce all the parts
Features: we are offering all of the Toyo drill parts, Good quality Korea made. High Quality Toyo 16, 24, 280 and Ty85 Rock drill