-
Introduction
R32 (1 1/4")
R38 ( 1 1/2"
-
The SH5000 is perfect boring machine in any construction site.
The reasons are as follows
1. With using 0.2 Track, work becomes convenient any places.
2. 360° rotating is so possible that side moving become easier.
3. oil pressure lever is attached in every work stations
4. Attaching concrete is possible.
1.
-
Iron Wire ( Heracles brand )
16mm heracles
18mm heracles
6mm iron wire x 1525m ( 1 roll )
for Core Drilling iron wire ( heracles brand
-
Drifter parts like piston, chuck, chuck bushing, guide valve, damping piston, long bolt etc mainly for famous drilling equipment. There are stocks available, just mail us
-
Core Drilling Rigs D 900
1. Drilling capacity : PQ - 600M
HQ - 1000M
NQ - 1200M
2. Engine : Doosan DE12T, 2200RPM, Water cooling system
3. water pump : mp-535 ( 3 cylinder )
4. Hydraulic system : 140Lx140L X 63C X 63C
5. Double clamp : PQ, HQ, NQ
-
SIZE
AX, BX, NX, NXD3, AS, BS, NS, NS3, HS, HS3, T76, T56
USAGE
It is a device to take the cores drilled by the core bit, and made of pipe.
Core barrels are mostly used to take the core, but sometimes they are used to increase the drilling efficiency even in case core are not needed. There are several kinds of
-
Introduction
Size
AW, BW, NQ, NQ3, HQ, NW, HW
Usage
1) Drill rods
It is sustained by a chuck of a drill rig. It digs by using a core barrel and a bit at front. Its major function is to transport the rotation and pressure of a drilling machine to the bit, as well as delivering drilling water to the bit. They also cool the bit rapidly and
-
1. Impregnated Diamond Casing Shoe : It should be used for the drilling of Soil or Soft Ground,
and it should be connected with Casing Pipe and digged through the hole that can be collapsed
anytime. During the works, it should be buried under the ground surface.
2. Impregnated Diamond Casing Shoe Bit : It is used for the drilling of soft ground
-
Drilling Capacity : 1000M.
Muliti purose : B, N, H, P, DTH Hammer, Water well, RC Hammer
Engine
Hydraulic system
Rod holder jaw
please kindly send inquiry then you may receive detail spcifications with
Drilling rigs
-
Size
AQ, BQ, NQ, HQ, PQ, T series
Usage
A diamond reaming shell is used with a connection to a bit. It can grind surfaces and dig a hole with a bit simultaneously. The tunneled hole must be larger than the diameter of the bit. (Reaming) It is used to prevent vibration, deformation of the walls, and early wear and tear of the outer diameter
-
Auger has been developed for speedy work as well as quick preparation including transportation.
It can be carried out auger work, down-the-hole hammer work, pile hammering and extracting work, and proved the best efficiency at construction field.
It can be extended or retracted with automatic
-
SIZE
BW, NW, HW, PW
USAGE
1. Impregnated Diamond Casing Shoe : It should be used for the drilling of Soil or Soft Ground, and it should be connected with Casing Pipe and digged through the hole that can be collapsed anytime.
During the works, it should be buried under the ground surface.
2. Impregnated Diamond Casing
-
-
MADE IN CANADA
PDC BITS : any size is available. please kindly send us your inquiry if you need
PDC Bits.
TRICONE BITS : any size is available. please kindly let us know your detail size
with IADC
-
SIZE
AX, BX, NX, AS, BS, NS, NS2, NS3, HS, HS3, PS, PS3, T76, T56, T46, T6116, T6101, T6131, T2101, NMLC, HMLC
USAGE
Bits are attached to the foremost part of the Core barrels to be used in direct drilling of the ground, and play the most important role among the equipments that are used in drilling. There are many types
-
Solex SS-10 is the synthetic water-soluble type cutting lubrications. It contains special additives and developed for the heavy cutting process, and some special skin parts require luminous intensity.
Especially, it removes the existing disadvantage for viscosity and machining problem. It also has an advantage to use various processes by
-
Tarpauline Water Tank
Water Tank
Water Bag
available 4 ton ( 20 drums )
6 ton ( 30 drums )
Minimum order quantity : 5 ea for each
-
DRILLING RIG
-Various models, customer specified
-Robust but compact
-Easy & safe
-
Solex M200 is the premium water-soluble cutting lubricant made from the finely purified Paraffin Base Oil with an extreme pressured ingredients and compound additive.
It is the semi-synthetic emulsion type cutting lubricant made with extreme pressure complex additives for deep cutting process and precise machining, and the some special skin pates
-
Fishing tools (= Fishing tap )
available size : B, N, H, 114MM.
Thread : AW, BW or Coupling