Product: remote power control equipment Control powers of five dependent equipment at a main equipment No limitation of communication distance (corresponding IEEE 802.X protocol) Spec: 1.Save the cost of security system establishment through the development of independent security protocol 2.Remote control through the Internet or a private

Automatic ULV spray system for mosquito(Pest) control APC-1000 is an disinfection equipment that automatically sprays chemicals at a given time by adjusting the spraying interval and time. APC-1000 exterminates the pest through automatic sterilization as being installed at location where mosquitoes and flying insects appear. Features ?

Product Introduction A patent-registered product suitable for maintaining one’s wellbeing and for achieving a better standard of living today. When activated, the device eliminates unpleasant odor through a fan and deodorizes the toilet with a filter after its use. (Deodorizing effect 95%, Tested by Korea Conformity Laboratories) No need to

Hi-Filter improves the control performance to fine dust and particles by the technical combination of the electric precipitation & filtration. 1. The Performance of the Hi-filter - Total collection efficiency:99.99%. - Dust concentration at exit:1mg/Sm3. - Detachment Interval:200 minutes. - Filtering speed :3.6 m/minute. - Life time of

This is the efficient VOC removal system composed of RTO/CO fusion, multi-bed regeneration of the waste heat and catalytic oxidation system, forming an Independent model through the development of the valve boxes required for a compact system. 1. Important of Technology Development Improvement of Economic Efficiency through Reduction

1. Specifications: The filter bag collection equipment installed at many dust-generating enterprises has cyclones or multi-clones in the front part which has resulted the costly burden of installation and maintenance not to mention the required extensive spacing. In order to solve this problem, the high-efficient Cybag Filter which integrates

The hood equipment system of the bath patented by J-E TECH was applied to capture the pollutants generated in the zinc plating process. The main features of this product is to separate the treatment bath and outside air by installing an air-blocking baffle and then prevent the pollutants from exhausting into air by creating a negative pressure

1. Characteristics - Suitable to mixture of dust and harmful gases. - Easy maintenance and management. (Prevention of nozzle plugging and pump damage) - Semi-permanent equipment due to the use of anti-corrosive material. 2. Applied Enterprises Business places handling high-concentration harmful gases including plating business and

1. Characteristics - Over 99% removal of sticky dust corrosive dust, high-temperature dust and harmful gases. - Minimum waste discharge due to reuse of circulation water. - Easy maintenance and management due to the installation of compact facilities. - No-pump type piping for winter seasons - No freezing damage of pumps. - Low cost

1. The Leather Waste Summary: The waste discharged from the leather manufacturing process has a variety of forms. Not only does it have a great deal of variation in water quality but also it requires a lot of water for treatment. If water is used at 40-80 L/kg of the original leather(cowhide), almost the entire amount is discharged as

1. Characteristics: - Treatment of offensive odor by insoluble gases, VOC treatment facilities. - Since dust is removing in the absorption tower at first,the clogging phenomenon of the activated carbon is prevented. - Due to the compact facilities the maintenance, management and replacement work of the activated carbon are easy to be