-
This is a device that controls and analyzes the quality of the welded section by measuring the current, voltage, and welding time using sensors upon arc welding. As a type of nondestructive inspection, it can perform total inspection in real-time, and carry out data formation of all inspection results.
Features:1. Optimized for real-time
-
Tire Cutting Horn (40KHz) for Cutting to
-
-
Introduction
For early fire action - Portable Aersol Type Fire Extinguisher
Anybody can use
-Easy & simple type! Everyone can use it easily
Spray Distance
-max 5m
-Children can use it
Echo-friendly
-Harmlessness for the human body
Handy,deposit,convenient
-It’s small spray type so it is convenient for deposit and
-
* Features
Capacy and usable rate
Possible full-using of 4.0 lengthy welding rod
Suitable for mechanics, canning, steel-structure workers
* Standard Specification
- Inverter D.C Arc Welding Power Source
Model
ECONO-230
Rated output current
A
10~200
Rated
-
-
Battery Horn & Nest(20KHz) for Battery
-
-
Through this device, reliable data can be secured with regard to WPS/PQR work that must be essentially prepared before performing welding in nuclear power, heavy industry, shipbuilding, chemical plant, etc. Furthermore, because automatic measurement is possible with this device, PQ work used to be done with a team of two personnel can now be
-
* Features
Compact and lightest
Conservation of energy
Various built-in protective functions
P.C.B. interior functions
- TIG ARC SPOT
- DOWN SLOPE
- CRATER
- PULSE SLECTION
- GAS AFTER FLOW
- TIG & MMA
- GAS CHEEK
- SELF COUNSELLING
Remote control can be used (optional)
Applied welding metal
- Nickel alloy
- Low-alloy
-
-
Chip Bonding Horn (40KHz) for Battery
-
Torches of CO2 welders are connected to cables and welding machines to create a flame for gas
welding or cutting and they are widely used for shipbuilding, automobiles and other various
industries.
It is composed of a torch grip connected to cables for welding to supply torch gas for welding, a
connecting pipe, and a handle to supply or block
-
With a sampling up to a maximum of 200kHz, it can measure welding waveform of all welding processes such as SMAW, GMAW, GTAW, FCAW, Plasma, SAW, SPOT, Projection, etc. In addition, since a software for waveform analysis is provided, it can reveal the cause of defect by managing and analyzing actually measured waveform.
Features:1. Capable of
-
* Features
Dual digital display function that enables setting and demonstration to be seen simultaneously.
Up-to-date equipment with 8 or more various kinds of multi-functioning
Welding current, Pulse current, Start current, Crater current
All kinds of metal welding is possible including aluminum alloy
Various built in protective
-
-
Anvil & Bolt (20KHz) for Metal
-
It’s suitable for development, modification and repair welding of precision welding.
It can be applied for various parts of injection mold equipment and could be the best one for
beginners that can be easily welded.
Features: No distortion, Shrink of base material
No [pore, blow(pin)hole, bubble, color change by welding
Weldable into deep,
-
This is a device that controls and analyzes the quality of the welded section by measuring the current, voltage, and welding time using sensors upon resistance welding. It is very easy to carry with a size that fits right in your hand. It can also be used as a self-calibration device of a welding device.
Features:1. Capable of simultaneous
-
* Features
1. Dual digital display function that enables setting and demonstration to be seen simultaneously.
2. It is equipped with up-to date circuit with more than 5 kinds of various multiple functions.
3. Use of upgraded system, economic design, and reliable high-quality equipment.
4. Guaranteed high usability regardless of its working