-
Available Excavators
1. KUBOTA - U-08 / U-10 / U-17 / U-20 / U-30 / KX-57 U-55
2. KOMATSU - PC18MR / PC20MR / PC30MR / PC50
3. YANMAR - SV08 / VIO15 / VIO15 / VIO20 / VIO30 / VIO35 / VIO55
4. KOBELCO - SK10 / SK17 / SK20 / SK27 / SK30 / SK35 / SK55
5. HITACHI - ZX8U / ZX10U / ZX17U / ZX30U / ZX35U / ZX50U
6. IHI -
-
-
-
Using only Earth grounding and bonding could not eliminate electrostatic charges from non-conductive materials as safe as it goes. This is the solution to relax the accumulated electrostatic charges within the short time by the combination of Swirl and Mesh Filter.
Features:Available for liquid
Measuring and controlling the electrostatic
-
As it is designed for the process which needs high pressure, it can be used for special fluid transfer in chemical plants and for high-pressure lubricators and high-pressure cleaning device.
Spec
Capacity range
Max. 15.0 ?/Hr
Differential Pressure
Max. 40.0 ?/?
Temperature
Max. 90 ?
Viscosity
Max. 5
-
? Non-Slip
Non-Slip rubber on handle for better grip
? Easy Grip
Ergonomically designed for mother to have an easier grip
? Hygiene
Designed to ensure a direct flow from the breast shield to the bottle for maximum hygiene
? Comfort Massage
Specially designed silicone bubbles for massaging the breast during pumping which encourages milk flow
-
Gear Pump
1.SinglePump
Spec]
3cc, 4cc, 6.5cc, 7.2cc, 10cc,11cc, 12cc, 14cc, 20cc
2.TandemPump
Spec]
12-6.5cc , 12-7.2cc
12-10cc, 14-6.5cc
14-10cc, 14-13cc
16-10cc , 16-12cc
20-14cc, 22-16cc
22-14cc, 24-14cc
Our employees are skillful and working environment is clear. To make customer satisfied, we are trying to keep the
-
-
GEAR
-
DF series
This product can be a wonderful solution for someone who considers how to transmit fluid, which contains big volume of sludge. It can replace general metering pump, which uses check ball valve. However, the material of head and flat valve (instead of using ball valve) is iron and rubber, so that it is not recommend to be used in
-
Introduction
Inhaled water inside pump to be compressed by piston and to be used for cleaning and washing at high pressurized discharging water.
With small volume of water without chemical.
- High Pressure Cleaning Pump: 15 models
Rated Pressure range 100-200 kgf/cm2 Flow rate 11-50liter/min
- Fixed type Fire fighting Pumps 3
-
Nano Silver Manual Breast Pump
Breast Pump 100% made in Korea.
What sets this product from other general breast-pumping devices that apply only negative pressure is that it applies and takes back the negative pressure repeatedly, allowing mothers to breast-pump softly just like they breast-feed their babies.
The smooth operation of the hand
-
1. Type : (D-A 2CYL)
2. Cylinder diameter : 102
3. Pouring quantity : 250~330
4. Pressure : 25~35
5. Double cylinder Number : 95~130
6. Input RPM : 285~380
7. Required power : 20~30
8. Pouring diameter : 50~80
9. Intake diameter : 50~80
10. Cylinder length : 89
11. Valve type :
-
Available Excavators
1. KUBOTA - U-08 / U-10 / U-17 / U-20 / U-30 / KX-57 U-55
2. KOMATSU - PC18MR / PC20MR / PC30MR / PC50
3. YANMAR - SV08 / VIO15 / VIO15 / VIO20 / VIO30 / VIO35 / VIO55
4. KOBELCO - SK10 / SK17 / SK20 / SK27 / SK30 / SK35 / SK55
5. HITACHI - ZX8U / ZX10U / ZX17U / ZX30U / ZX35U / ZX50U
6. IHI -
-
-
DW series metering (dosing) pump
This product is steady seller like books. Since its product launch in 1993, there has been no revision of the product design. The reason is that there’s no need to do so. It is wonderful product design so that there are no defect and malfunction at all. If operator maintains it well, it should work above 10
-
*High suction capacity caused by double suction *High quantity transportation and high efficiency *Assure balance with symmetrical structure *Easy installation with horizontally split casing
-
- Enamel basic pumps with stylish base line
- Cute and pretty egg-shaped round nose
- Comfortable to wear for long time and proper heel size, 6cm
- Attractive design to catch eyes and more comfortable function
- Glittering enamel is luxurious and the
-
1. Type : (D-A 2CYL)
2. Cylinder diameter : 84
3. Pouring quantity : 115
4. Pressure : 30
5. Double cylinder Number : 100
6. Input RPM : 260
7. Required power : 7.5~15
8. Pouring diameter : 25
9. Intake diameter : 40
10. Cylinder length : 63.5
11. Valve type : BOLL or DISK
12.
-
Available Excavators
1. KUBOTA - U-08 / U-10 / U-17 / U-20 / U-30 / KX-57 U-55
2. KOMATSU - PC18MR / PC20MR / PC30MR / PC50
3. YANMAR - SV08 / VIO15 / VIO15 / VIO20 / VIO30 / VIO35 / VIO55
4. KOBELCO - SK10 / SK17 / SK20 / SK27 / SK30 / SK35 / SK55
5. HITACHI - ZX8U / ZX10U / ZX17U / ZX30U / ZX35U / ZX50U
6. IHI -