Non woven fabric for inter lining and reinforcement for shoe making. White, black and all colors are available according to customer`s need. The price is more competitive than another

Drying & Setting Oven Model : YKFM/DS001 ¦Features¦ It is designed to operate both fan motor and cooling fan after firing the burner, stop and convey the tow from climper when the temperature of setting machine increases around 160°C~180°C. To carry out the regular works, it is necessary ro set the temperature to 90°C and to reduce

Stretcher & Crimper M/C Model : YKFM/SS001 ¦Features¦ This machine is designed for its boilet system to heat the water, in stretcher to 80°C~90°C to maximize its stretching over the first, second and third steps. As a result, it features such advantages as the better bulky performance, simple installation and operation of cromping,

Can Winder Model : YKFM/CW001 ¦Features¦ It can receive some radiation and discharge at once. One worker can operate and adjust RPM, so he can operate machine without replacing nozzle at 3D~24D. In replacing nozzle, worker can replace nozzle also at 40D. This system is designed for mass production by removing entanglement and knot of

ExtruderModel : YKFM/EX001 ¦Features¦ It is heated by 230°C~280°C of high temperature by setting the heater to both dies and cylinder, and then it is extrude and radizted to screw, The quality of cylinder and screw is nitriding steel, so there isn`t any deformation also under high temperature. It has a long life and excellent capacity of

Mixing Tank ¦Features¦ Scatter is scattering fibers at the back of machince, than it is very superior to blend and lay fibers. ¦specification¦ TYPE Mixing Feeder MFK-3.0 Mixing Stocker MSK-3.0 M-Length 9420 M-Height 4280 M-Width 6000 Working width

Hopper Feeder & Beater Opener ¦Features¦ This allows 3 fibers to be mixed in the correct proportions by means of hopper feeders, weigh pans a cross conveyer and is illustrated with a beater opener fiber transport fan. The line incorporates the use of a strong Al-Ni-Co magnet and the unit can feed up to 2 or 3 card lines. For

Screw DryerModel : YKFM/SD001 ¦Features¦ It is dryer that uses motor and heater after putting 400~500kg of raw material. Worker put optimum quantity of chemical and blue and white dyestuff at about 100°C~120°C , and then put raw material at 170°C~180°C. It has auto-measuring device which can control quantity of raw material. In

Slitter, Cross Cutter & Winder Model : UTSCW ¦Features¦ This model automatically cuts and take up the width and the total length of a finished product, thus boosting convenience. In the case of cross cutting, the machines use LM GUIDE, thus making the cutting line straight. The power transmission uses not chains but timing belts, thus

Conveyer Feeder & Cylinder Opener ¦Features¦ After each lot of material has been weighed, it is laid on the conveyer lattice which automatically carries the material of an amount as required by the Feeder, onto the bottom lattice. In the Hopper section, the material is carried on spikes attached to an endless upward-inclined lattice

Cutting Machine & Oil Pressure Packing Machine Model : YKFM/CM001 & YKFM/PK001 ¦Features¦ It is machine that cut the set-processed goods by order, so it is convenient to replace knife as well as to remove cutting error. There is no damage of knife board supports knife well. Also it is simple to control cutting speed because of VS

Non woven fabric for inter lining and reinforcement for shoe making. White, black and all colors are available according to customer`s need. The price is more competitive than another

Non woven fabric for inter lining and reinforcement for shoe making. White, black and all colors are available according to customer`s need. The price is more competitive than another