-
Introduction
Matt for excellent appearance and eye-catching effect.
Easy and smooth operation.
Protect against ultraviolet rays, moisture, and constant surface contact.
Deeper, richer image output
Excellent chemical resistant to most of clearing
-
-
This film must be softer than the current polyester films after laminating but it can be laminated at very low melting temperature The characteristics of polypropylene pouch film is as follows; a. Very low melting temperature b. Soft and no curl after laminating c. Anti-static characteristics d. Lower prices e. High speed laminating acceptable f.
-
High Speed Copier Transparencies (PPC) Inkjet Transparencies Lasernex
-
Machine Operating Width : 1000mm ~ 1800mm(Max) Machine Operating Speed : 60m/min ~ 150m/min Un-winding, Winding Dia : 800mm(Max) Dryer : Arch-Type Jet
-
Light guide plate laminating machine
For the purpose of preventing foreign substances and scratches from the surface of a light guide plate packing of vinyl coping films minimization of scratches with a specially fabricated feed
-
DS-7402 GLASS EPOXY LAMINATE
Features
-. Middle Tg(Tg 150?)
-. Halogen-free, antimony-free, and red phosphorus-free
-. high decomposition temperature
-. Low z-axis CTE
-. Anti-CAF property
Applications
-. Alternative for conventional lead-free FR-4
-. Personal computer, notebook computer
-. Cellular phone, A/V device,
-
Laminated film heater
Film boiler
state
Semi-finished
Finished
composation
? Carbon printed on the PET film
? Do lamination insulating material and film heater
? Inserting copper stripe while doing lamination.
? Do both side lamination
-
Max. Laminate Thickness : 20mm
Heater : Cartridge Heater
Temperature : PID Control (30~180℃±2℃, 36zone)
Vacuum Pump : Dry Pump (10,000L/min)
Chamber Lift system : 4-Axis Power Cylinder
Lift Unit : Geared Motor & Power Cylinder
Press control : 3Press control
-
These products are manufactured by autoclave high pressure process. The applications of extrusion coating EVA include thermal film(Laminex film) and flexible film, etc. Hanwha EVA offers a excellent processability and performance. Please refer to the catalog for more information about the
-
Laminating system
Laminating system is to bond the EPS board or mineral-wool lamellas to the glue applied color steel sheet. The reaction pressure of the polyurethane foam, which used for adhesive, is bearable level with rubber coated rollers at regular intervals. So, it can be used instead of double belt slat conveyor to save the investment