Shaft Type Rotary Torque Transducer (5kgf.cm ~ 200kgf.cm)   Features. Model TRS is possible for measuring continual torque as rotating torque sensorwith strain gauge type.It is compact size and suitable for measuring minute torque.   Model TRS Rated capacity(R.C.) 5,10,20,50,100,200 kgf.cm Rated

Operating based on the principal of strain gauge, TCR model is available formeasuring RPM and torque of continuous rotating object. Application include theperformance testers for industrial measurement equipment such as clutch,transmission, motor and pumps.Possible to manufacture in your order. Model TCR Rated

Shaft type Rotary Torque Transducer(5kgf.cm ~ 1000kgf.cm) Feature TCS models are appropriate for measuring torque of continuous rotating object with comparative low capacity and for using bolts, assembly and product line in laboratory. Specification Model TCS Rated capacity(R.C.) 5,10,20,50,100,200,500,1000 kgf.cm Rated

Flange Type Rotary Torque Transducer (20kgf.m ~ 300kgf.m) Feature Model TRFF is used to measure continuous torque of rotating products as strain gauge method, has high accuracy by using brush and sliping and can be installed with easy as flange type. Specification Model TRFF Rated capacity(R.C.) 20,50,100,300kgf,m Rated

Socket Wrench Type Rotary Torque Transducer (20kgf.cm ~ 2000kgf.cm) Feature Model TCSW socket wrench torque sensors are used for fast, accurate measurement of bolt or nut wrenching torques. This model operates in both directions so tightening and break-away torques can be measured. It can also be used to check the calibration of mechanical

Flange & Shaft Type Reaction Torque Transducer (10kgf.cm ~ 2000kgf.cm) Feature TFS models have the same features as the model of both TFF and TSS and are designed for meeting customer's special requirement. Specification Model TFS Rated capacity(R.C.) 10, 20, 50, 100, 200, 500, 1000, 2000 kgf,cm Rated

Flange Type Reaction Torque Transducer (10kgf.cm ~ 50000kgf.cm) Feature A static torque sensor for measurement of torque of stational objects or within a certain angle rotation.Suitable for torque measurement of various automobile parts.Pneumatic and electric screwdriver etc. Specification Model TFF Rated capacity(R.C.) 10,

Shaft Type Reaction Torque Transducer (10kgf.cm ~ 10000kgf.cm) Feature TSS models as shaft torque transducer have the same features as the model TFF. The applications are suitable for adjusting torque at shut-off couplings, measuring of steering devices and checking electric and pneumatic motors. Specification Model TSS Rated

Flange Type Rotary Torque Transducer(5kgf.m~300kgf.m) FeatureModel TRF is used to measure torque of auto engine and various motor as rotating torque sensor of flange type. Specification Model TRF Rated capacity(R.C.) 5, 10, 20, 50, 100, 200, 300kgf.m Rated output(R.O.) 1.5±0.35mV/V Non-linearity <0.3%

Flange & Shaft Type Reaction Torque Transducer (50kgf.cm ~ 2000kgf.cm) Feature Reaction measurements eliminate speed limitations.Minimal friction error.Compact "low mass" physical size Specification Model TNN Rated capacity(R.C.) 50, 100, 200, 500, 1000, 2000 kgf,cm Rated output(R.O.) 1.5 ±

Flange Type Reaction Torque Transducer (10kgf.cm ~ 1000kgf.cm) Feature A static torque sensor for measurement of torque of stational objects or within a certain angle rotation.Suitable for torque measurement of various automobile parts.Pneumatic and electric screwdriver etc. Specification Model TFC Rated

Shaft Type Rotary Torque Transducer (5kgf.cm ~ 200kgf.cm)   Features. Model TRS is possible for measuring continual torque as rotating torque sensorwith strain gauge type.It is compact size and suitable for measuring minute torque.   Model TRS Rated capacity(R.C.) 5,10,20,50,100,200 kgf.cm Rated

Single Point Load Cell (100kgf ~ 500kgf) Feature Low cost Off center compensated Protection class IP65 Specification Model CBCD Rated capacity(R.C) 100, 150, 250, 300, 500 kgf Rated output(R.O) 2.0 ± 0.2 mV/V Zero balance 0 ± 0.1 mV/V Combined error 0.03% R.O. Repeatability 0.01%

Single Point Load Cell (6kgf ~ 30kgf) Feature Low cost Off center compensated Protection class IP65 Specification Model CBCL Rated capacity(R.C) 6, 10, 15, 20, 30 kgf Rated output(R.O) 2.0 ± 0.2 mV/V Zero balance 0 ± 0.1 mV/V Combined error 0.03% R.O. Repeatability 0.01%

Single Point Load Cell (50kgf ~ 500kgf) Feature Low cost Off center compensated Protection class IP65 Specification Model CBCM Rated capacity(R.C) 50, 75, 100, 150, 200, 300, 500 kgf Rated output(R.O) 2.0 ± 0.2 mV/V Zero balance 0 ± 0.1 mV/V Combined error 0.03%

Single Point Load Cell (5kgf ~ 100kgf) Feature Low cost Off center compensated Protection class IP65 Specification Model CBCA Rated capacity(R.C) 5, 10, 15, 20, 30, 50, 75, 100 kgf Rated output(R.O) 2.0 ± 0.2 mV/V Zero balance 0 ± 0.1 mV/V Combined error 0.03% R.O. Repeatability 0.01%

Single Point Load Cell (600gf ~ 3kgf) Feature Low cost Off center compensated Protection class IP65 Specification Model CBCL Rated capacity(R.C) 1,2,3kgf(special type : 600gf) Rated output(R.O) 1.0 ± 0.2mV/V Zero balance 0±0.1mV/V Combined error 0.03% R.O. Repeatability 0.01%

Bending Beam Load Cell (20kgf ~ 500kgf) Feature All stainless steel construction Industry standard size and shape Protection class IP65 Specification Model CBCM Rated capacity(R.C) 20, 50, 100, 200, 500 kgf Rated output(R.O) 2.0 ± 0.005 mV/V Zero balance 0 ± 0.2 mV/V Combined error 0.03%