-
[Application]
•
Eco friendly- interior, house, furniture, wall paper, green building[construction] materials, car
•
Deodorization: MDF, particle board, plywood, chip board, laminate, paint, interior element, concrete, glue, adhesive, malodor, smoke
•
improvement of ‘Inner Air Quality’ : new/ renovated house/
-
Herbal Heat Packs for Shoulders
Color : Red, Green, Blue, Khaki
Outer Case : 100% cotton
Weight : 1700(g)
Size : (60x25cm) (width x length)
Filling Materials : 100% dried natural herbs
How to Use : Make sure you check the directions below before using the heat pack.
* recommended heating time (approx. 2 to 4 minutes in the
-
Introduction
Volts 220V Amp : 8.6A In-put 1,870 RPM : 16rpm : 117tpm Weoght : 52kg MAc Bit :
-
When (1) manufacturing casting products, we first shape (2) the mold with (3) wood after which we mold the casting. With the mold manufactured in advance as in (3), we manufacture the necessary equipment and line for the production of sand shapes. We have two types of equipment with different working methods and the oil-pressure type casting line
-
Introduction
Max. Cutting Capacity 32mm Bending Angle 45-180 Working speed 6sec/180degree Power 220V 50/60Hz Size (mm) 480x465x470 Weight (kg) 105
Feature
The potable rebar bender is suitable for use on the construction site.
Fast and easy change of angles with two control levers attached to present the bending angles. (Available angle :
-
MDF Mouldings for
-
CLEANLIGHT
Cleanlight is referred to a single—layer sheet manufactured through extruding, cutting and processing based on polycarbonate resin. Cleanlight is the most common product and excellent at impact resistance and porousness, so it is frequently used not only in architecture but also in electric industry effectively creating aesthetic
-
Auto water feeding system
The automatic plant pot-watering apparatus, through osmosis, provides water this way: water is drawn into the pot from the plant pot support (water container) through the water supplying rod. As such, there is no need to worry about the amount of time spent watering or the quantity of water to be used. Users just need to
-
[Resin Welding]
Transparent Acryl Welding
Welded acryl resin has good adhesive strength at high and low temperature from 60–20?, and remains transparent without bubbles in an environment with increasing-temperature, regardless of the humidity and temperature cycle. In addition, UV printing is available through graphics.
? 10
-
Introduction
Spring Glory F1, a new, super extra early overwinter short day F1, best doop brown coloured skin with high yield potential. The bulb showes the very uniform semi-globe in shape, weighs 260-270grams. Tolerant to downy mildew and
-
The joint between a floor and a wall easily gets dirty and damaged while cleaning takes place or especially when scrubbing is conducted. As a material used on the very area where a ceiling or a floor encounters a wall, this Interior Molding product is, however, sure to prevent the wall from being polluted with its superb function to soundly
-
-
125KHZ
Classification
EM card
TEMIC card
HITAG series
Chip maker
EM microElectronics
ATMEL
NXP (The semiconductor of Philips)
Model name
EM4200
EM4450
ATA5577
HITAG1
HITAG2
HITAG S
International
-
Ombre fabric (Oxford)
It is referred as " yean dyed fabric”
Before producing fabric, it is a method to weave the thread as a needed color after dyeing, according to the texture, uses a lot by designing as a modified pattern such as stripe and plaid etc.
Color is even than the printing fabric by weaving generally, there is an advantage even
-
Introduction
1.New Powerful motor : Input 1,100W
2.Built-in Circuit breaker to protect motor
3.Duble insulation motor
4.Light weight pole base : Application 40mm square
-
Current ---------------- 200A
Usage ----------------- DC ARC & DC TIG
Weight -----------------14
* Features
1. Dual Purpose Welding Machine(DC Arc & DC TIG Welding 200A)
2. Applicable thickness 0.2~0.4mm
3. Weight 11.5kg
4. Applicable metal: nikel alloy, stainless steel, low-alloy steel and etc...
RATED INPUT VOLTAGE
-
HKRUB200 is the rubber for modeling after the pattern of a tire mold, which is used after mixing
with HKRUBK200. Due to its optimum viscosity, the complicated pattern of a tire mold can be
modeled after perfectly and the intermixing with bubbles has been minimized.
How to use
1. Mix HKRUB200 and HKRUBK200 in ratio of 100:14.
2. Mix by
-
Introduction
vase & artificial
-
This product is manufactured in accordance with international standards.
Features:Durable and wear-resistant
We may also customize according to customer’s specifications.• Easy on/off ratchet buckle bunding system.
• Installed anti-snow ball pad
Spec.:- Material: special heated steel, electrodeposition coating
- Size:
-
With a sampling up to a maximum of 200kHz, it can measure welding waveform of all welding processes such as SMAW, GMAW, GTAW, FCAW, Plasma, SAW, SPOT, Projection, etc. In addition, since a software for waveform analysis is provided, it can reveal the cause of defect by managing and analyzing actually measured waveform.
Features:1. Capable of