Product
Description
Joncryl 74-A
Soft film forming acrylic emulsion for printing ink, overprint varnish, and functional packaging coating applications
Joncryl 77
Hard film forming, Rheology Controlled (RC) acrylic emulsion for printing ink and overprint varnish formulations
Joncryl 89
Non film forming general purpose acrylic emulsion for Ink and OPV
Joncryl 90
Non film forming emulsion for high gloss and optical properties for OPV
Joncryl 537
Acrylic emulsion for Alkali Resistant coating applications
Joncryl 538A
Non film forming acrylic emulsion for an alcohol, alkali and detergent resistance film for Ink and OPV
Joncryl 624
General purpose, soft film forming, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl 631
High-hiding, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl 646
High molecular weight, acrylic colloidal emulsion for corrugated ink applications
Joncryl 1536
Rheology Controlled (RC), metallic ink vehicle for printing ink applications
Joncryl HRC 1661
High performance, film forming, hybrid RC emulsion for OPV and ink applications providing significant improvements in rub and water resistance at a cost equal to comparable acrylic emulsions.
Joncryl 1695
Zinc-free, heat-resistant, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl 2038
Detergent Resistant Wall paper Inks for vinyl and paper substrates
Joncryl 2136
Soft film forming emulsion for metallic bronze pigments
Joncryl 2157
Non film forming emulsion with fast drying and printability, Low curling
Joncryl ECO 2177
Hard, non-film forming, glycol ether-free(1), Rheology Controlled (RC) acrylic emulsion for printing ink and overprint varnish applications
Joncryl 2178
Hard film emulsion with wet & dry block resistance with high slide angle
Joncryl ECO 2188
Non film forming emulsion with glycol ether free and ultra low VOC
Joncryl ECO 2189
Hard, non-film forming, glycol ether-free(1), Rheology Controlled (RC) acrylic emulsion for printing ink and overprint varnish applications
Joncryl 2640
High gloss, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl 2646
High gloss, Rheology Controlled (RC) acrylic emulsion for high density polyethylene (HDPE) film ink applications
Joncryl 2660
Rheology Controlled (RC) acrylic emulsion for high gloss, transparent polyethylene film and foil ink applications
Joncryl 2664
Film forming, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl DFC 3030
Non film forming emulsion with fast dry and block resistance for direct food contact
Joncryl DFC 3040
Hard film forming emulsion with rub and block resistance for direct food contact
Joncryl FLX 5000
Self-crosslinking, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl FLX 5010
Self crosslinking emulsion for surface printing
Joncryl FLX 5020
Self crosslinking emulsion for surface printing
Joncryl FLX 5030
Self crosslinking emulsion for surface printing
Joncryl FLX 5040
Self crosslinking emulsion for reverse printing
Joncryl LMV 7025
Low maintenance vehicle, pH-stable, acrylic resin solution for printing ink applications
Joncryl LMV 7031
Low maintenance vehicle, pH-stable, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl LMV 7034
Low maintenance vehicle, pH-stable, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl LMV 7040
Low maintenance vehicle, pH-stable, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl LMV 7050
Low maintenance vehicle, pH-stable, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl LMV 7051
Low maintenance vehicle, pH-stable, non-film forming, Rheology Controlled (RC) acrylic emulsion for printing ink applications
Joncryl LMV 7085
Low maintenance vehicle, pH-stable, high performance acrylic resin solution for pigment dispersion applications
Joncryl 8050
Film forming emulsion with water & grease resistance
Joncryl 8066
Hard non film forming emulsion for endless press & calendaring coating
Joncryl Wax 26
Small particle size, polyethylene wax emulsion for printing ink, overprint varnish, industrial coating, and functional packaging coating applications
Joncryl Wax 28
Paraffin/polyethylene wax emulsion for printing inks, overprint varnish, and functional packaging coating applications
Laromer DPGDA
An acrylic acid ester used as a reactive monomer in energy curable coatings, inks, overprint varnishes, as a feedstock for synthesis, and for manufacturing polymers. It contains two polymerizable acrylate groups per molecule, which enables it to form copolymers
Laromer HDDA
An acrylic acid ester used as a reactive diluent in energy curable coatings, inks, overprint varnishes, as a feedstock for synthesis, and for manufacturing polymers. It contains two polymerizable acrylate groups per molecule, which enables it to form copolymers
Laromer LR 8765
Aliphatic epoxy acrylate for energy curing
Laromer LR 8863
A polyether-modified acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications
Laromer LR 8967
A polyether-modified acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications
Laromer LR 8986
An aromatic epoxy-modified acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications
Laromer LR 9013
An all purpose dispersing oligomer for the formulation of energy curable offset, flexographic, and silk-screen printing inks as well as coatings for paper, wood, and wood product applications
Laromer PE 55 F
A liquid polyester-modified acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications
Laromer PO 43 F
A polyether-modified acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications
Laromer PO 94 F
A liquid modified acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications
Laromer POEA
An acrylic acid ester monomer that is used as a reactive diluent in energy curable coatings, inks, overprint varnishes, as a feedstock for synthesis, and for manufacturing polymers. It contains one polymerizable acrylate group per molecule, which enables it to form a copolymer
Laromer TMPTA
An acrylic acid ester that is used as a reactive monomer in energy curable coatings, inks, and overprint varnishes. It contains three polymerizable acrylate groups per molecule, which enables it to form copolymers
Laromer TPGDA
An acrylic acid ester that is used as a reactive monomer in energy curable coatings, inks, and overprint varnishes. It contains two polymerizable acrylate groups per molecule, which enables it to form copolymers
Laromer UA 19 T
A urethane-modified acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications
Versamid 725
A thermoplastic polyamide resin for printing ink applications
Versamid 728
A high viscosity, alcohol-soluble, amine-terminated polyamide resin for low cost printing ink applications
Versamid 744
A high performance, alcohol-soluble polyamide resin for printing ink or overprint varnish applications
Versamid 750
An ethanol reducible, polyamide resin for flexographic printing ink vehicles
Versamid 754
An ethanol reducible, polyamide resin for flexographic printing ink vehicles
Versamid 756
An ethanol reducible, polyamide resin for flexographic printing ink vehicles
Versamid 757
A low viscosity polyamide resin for flexographic printing ink vehicles and overprint varnishes
Versamid 795
Ink Polyamide
Versamid 917
A thermoplastic polyamide resin for printing ink and overprint varnish applications
Versamid 930 US
A thermoplastic polyamide resin for antistatic coating, thixotropic printing ink and overprint varnish applications
Versamid 940 US
A thermoplastic polyamide resin for printing ink and overprint varnish applications
Versamid 958
A thermoplastic polyamide resin for printing ink and overprint varnish applications
Versamid 959
A thermoplastic polyamide resin for printing ink and overprint varnish applications
Versamid 963
A thermoplastic polyamide resin for printing ink and overprint varnish applications
Versamid 967 GR
A thermoplastic polyamide resin for printing ink applications
Versamid 971
A thermoplastic polyamide resin for printing ink applications
Versamid 972
A thermoplastic polyamide resin for printing ink applications
Versamid 973
A thermoplastic polyamide resin for printing ink applications
Versamid 1655
A thermoplastic polyamide resin designed for use in thermographic printing applications
Versamid PUR 1010
A thermoplastic polyurethane resin for flexographic printing ink applications
Versamid PUR 1011
A thermoplastic polyurethane resin for flexographic printing ink applications
Versamid PUR 1120
A thermoplastic polyurethane resin for printing ink applications
Versamid PUR 2011
A TDI and tin-free, non-reactive, thermoplastic polyurethane resin for printing ink applications
Darocur 1173
A versatile, highly efficient, liquid alpha hydroxy ketone photoinitiator which is used to initiate the photopolymerization of unsaturated prepolymers acrylates in combination with mono- or multifunctional monomers
Darocur 4265
A highly efficient liquid photoinitiator blend of acyl phosphine oxide/alpha hydroxy ketone which is used to initiate radical photopolymerization of unsaturated resins such as those based on a prepolymer acrylates in combination with mono- or multifunctional monomers as reactive thinners
Darocur BP
A benzophenone photoinitiator that is used to initiate radical photopolymerization of unsaturated resins such as those based on a prepolymer acrylates in combination with mono- or multifunctional monomers
Irgacure 184
A highly efficient, non-yellowing alpha hydroxy ketone photoinitiator that is used to initiate the photopolymerization of unsaturated prepolymers acrylates in combination with mono or multifunctional vinyl monomers
Irgacure 369
A highly efficient, alpha amino ketone photoinitiator that is used to initiate the photopolymerization of unsaturated prepolymers acrylates in combination with mono or multifunctional monomers
Irgacure 379
A highly efficient, alpha amino ketone photoinitiator that is used to initiate the photopolymerization of unsaturated prepolymers acrylates in combination with mono or multifunctional monomers
Irgacure 500
A liquid blend of alpha hydroxy ketone/benzophenone photoinitiator that is used to initiate the photopolymerization of unsaturated prepolymers acrylates in combination with mono or multifunctional monomers
Irgacure 651
A highly efficient, benzyldimethyl ketal photoinitiator that is used to initiate the photopolymerization of prepolymers unsaturated polyesters or acrylates in combination with mono or multifunctional monomers
Irgacure 819
A versatile, acyl phosphine oxide photoinitiator for radical polymerization of unsaturated resins upon UV light exposure. It is especially suited for white pigmented formulations, the curing of glass fiber reinforced polyester/styrene systems, and for clear coats for outdoor use in combinations with light stabilizers. Thick section curing is also possible with this photoinitiator
Irgacure 819-DW
A versatile, acyl phosphine oxide photoinitiator for radical polymerization of unsaturated resins upon light exposure. It is especially suited for the curing of pigmented waterborne polyurethane dispersions (PUDs), the daylight curing of PUD-based clear coats, and for use in combination with light stabilizers. Other possible uses include thick section curing, emulsion-type and 100% UV systems
Irgacure 907
A highly efficient, alpha amino ketone photoinitiator that is used to initiate the photopolymerization of chemically unsaturated prepolymers - e.g. acrylates in combination with mono- or multifunctional vinyl monomers
Irgacure 2022
A highly efficient liquid photoinitiator blend of acyl phosphine oxide/alpha hydroxy ketone that is used to initiate radical polymerization of unsaturated resins after UV light exposure
Irgacure 2100
A highly efficient, stable liquid acyl phosphine oxide photoinitiator that is used to initiate radical polymerization of unsaturated resins after UV light exposure such as those based on a prepolymer acrylates and unsaturated polyesters in combination with mono or multifunctional monomers as reactive thinners
Irgacure 2959
A highly efficient, non-yellowing radical, alpha hydroxy ketone photoinitiator for the UV curing of systems comprised of unsaturated monomers and prepolymers. It is especially suited where low odor is required and for use in waterborne systems based on acrylate or unsaturated polyester resins. The active hydroxy group can be reacted with suitable functionalized unsaturated resins
Share Flexo and Gravure Printing Inks & OPV in Social Media