Hot Runner Controller TC-880

Temperature Controller Hot runner system is a devised method to produce products continuously by maintaining resin as melted state. The controller heats a sprue and a runner which serve as a route of melited resin to fill cavity in plastic injection mold. TempControls series(TC) realized a most precise temperature control behavior with an excellent performance processor and reinforces the heat radiation structure. And by adopting LCD touch screen (TC-3200 Series), it improves user convenience rather than the existing products. TC-880 SeriesSingle Zone Type ¦Features¦ Controlling precisely temperature with adopting new PID algorithm Protecting over voltage and false connection Displaying parameters(T/C setting, degree F/C indication, operation state, Soft, etc) Detecting errors (alarm, voltage, heater short, triac short) Correcting Temperature (difference and slope compensation) Algorithm to prevent triac breakage (improve cooling effciency of heat sink, adopt high capacity triac) Protection function against wiring error, heater short, over voltage, over current TC-880 uses cartridges.When a unit causes problem, just replace the unit cartridge. It does not affect whole system operation. ¦Specifications¦ Input Power 3-Phase 3Lines + E(4 wire) 220 VAC 50/60 Hz, ±10% 3-Phase 4Lines + E(5 wire) 380 VAC 50/60 Hz, ±10% Measurement Accuracy ±0.3°C for the range 30°C to 400°C (TC-880 Series, Optional 30~500°C) ±0.3°C for the range 30°C to 500°C (TC-3200 Series) Tuning Method Auto Tuning PID or Manual PID Control Thermocouple Inputs Grounded or Ungrounded Thermocouple Type IC(J) or CA(K) Type Supported Heater Outputs All Zones rated at 240 VAC. 15 Amps per zone standard Control Zones TC-880 : 1~60 Zones TC-3200 : 6~144 Zones Alarms Over voltage protectionShort circuit protection for each zone (both legs fuesd)Alarms Open circuit heaterOpen circuit Fuse(s)High and Low temperatureOpen, Shorted or Reversed Thermocouple(s)