Heat Exchanger

  Fintube type Heat Exchanger    Install finned tubes inside of Heat Exchanger and maximize its performance. This type of Heat Exchanger can subdivide as Steam air heater, Air pre-heater, Oil tank heater, Gas heater, Recuperator, Economizer, Air cooler, Water cooler, Oil cooler, Gas cooler and etc. The maximum pressure is 300kg/cm2G, the maximum temperature is 400°C and the maximum weight is 50ton. 100 sets a year can be produced (Based on 12ton).       Tubular type Heat Exchanger    Install bare tubes inside of Heat Exchanger and maximize its performance. It is normally called "Shell & Tube type Hear Exchanger." This type of Heat Exchanger can subdivide as Gas heater, Gas cooler, Evaporator, Condenser, Reboiler, Water heater, Water cooler, Air heater and etc. The maximum pressure is 300kg/cm2G, the maximum temperature is 400°C and the maximum weight is 50ton. 100 sets a year can be produced (Based on 12ton).       Plate Heat Exchanger                            The plate pack with fixed and movable end covers is clamped together by tightening bolts, thus compressing the gaskets and forming a seal. Each plate is made by embossing a corrugated surface pattern on sheet metal. The flow pattern through a gasketed-plate heat exchanger is illustrated as belows. Gasketed-plate heat exchanger are extensively used in chemical industry, steel industry, mechanical industry, food industry, and ship building industry.       Waste heat recovery heat exchanger    Increase the performance of Heat Facilities using various Heat Exchangers and increase the Energy Efficiency using Waste Heat Recovery. This type of Heat Exchanger can subdivide as Heat pipe heat exchanger, Fintube Bundle type heat exchanger, Recuperator type Heat Exchanger and etc.       Special type of Heat Exchanger    Not usual but can be produced with our own technology. This type of Heat Exchanger can subdivide as Double pipe heat exchanger, Plate type Air pre-heater, Drier and etc.