HYDRAULIC ELECTRIC MOTOR PUMP

HYDRAULIC ELECTRIC MOTOR PUMP Light weight & Compact design Can be used for every electric tools. Various models can be used with the most of hydraulic tools. HP: 1/3, 1/2, 1, 2, 3HP Max pressure: 700bar ¦ Electric Motor Pump (1/3HP)¦ >> Specification Model Flow rate (l/min) Pressure rating (kg/cm2) Reservoir capacity(liter) Weight(kg) KUP-35RH Low High Low High 0.8 7.5 2.0 0.2 10 700 1.6 8.5 >> Features and function of each model Model Function Weight(kg) KUP-35RH-NC(L) Pressure hold type. Cylinder can be stopped on forward action.Cylinder cannot be stopped on retraction. 7.5 KUP-35RH-NO(L) While on switch is pressed, pump is running. With optionally incorporated pressure switch,cylinder can be stopped at set pressure and cylinder returns automatically. 7.5 KUP-35RH-IN(L) Cylinder can be stopped both on forward action and retraction. 7.5 >> Hydraulic Circuits ¦ Electric Motor Pump (1/2HP)¦ >> Specification Model Flow rate (l/min) Pressure rating (kg/cm2) Reservoir capacity(liter) Weight(kg) KUP-35RH Low High Low High 2.0 18 2.5 0.35 70 700 4.0 20 >> Features and function of each model Model Function Weight(kg) Singleacting KUP-45SVG-1(L) A single-acting cylinder is actuated by 3 way manual valve. Pressure hold type. 16.1 KUP-45SVG-4(L) A singled-acting cylinder is actuated by solenoid valve. "Advance" with ON switch depressedand the motor running. "Retract" with the switch released and the motor stops. 17.2 Doubleacting KUP-45SVG-7(L) A double-acting cylinder is actuated by 4 way manual valve. 16.1 KUP-45SVG-8H(L) A double-acting cylinder is actuated by solenoid valve. The cylinder can not be stopped,and pressure can not be hold. 18.5 KUP-45SVG-8WP(L) A double-acting cylinder is actuated by solenoid valve. Advance/ "A" port Hold/Retractwith stacking type pilot-operated check valve tted on "A" port line.It allows pressure holding on both "A" and "B" port lines. 19.0 >> Hydraulic Circuits