-
Available Excavators
1. KUBOTA - U-08 / U-10 / U-17 / U-20 / U-30 / KX-57 U-55
2. KOMATSU - PC18MR / PC20MR / PC30MR / PC50
3. YANMAR - SV08 / VIO15 / VIO15 / VIO20 / VIO30 / VIO35 / VIO55
4. KOBELCO - SK10 / SK17 / SK20 / SK27 / SK30 / SK35 / SK55
5. HITACHI - ZX8U / ZX10U / ZX17U / ZX30U / ZX35U / ZX50U
6. IHI -
-
Theory Output Max. Rod side/Piston side ( m3/hr) : 81/55 100/68 109/76 Theory Concrete Pressure Rod side/Pistone side ( bar) : 70/105 116/172 153/224 Conveying Cylinder Diameter ( mm ) : 200/200/200 Conveying Cylinder Storke ( mm ) : 1,600/2,100/2,100 Number of Storke Rod side/Piston side ( n /min ) : 27/18 25/17 26/18 Engine Power/ RPM ( HP/ RPM
-
1. Type : (D-A 2CYL)
2. Cylinder diameter : 67
3. Pouring quantity : 65
4. Pressure : 30
5. Double cylinder Number : 100
6. Input RPM : 260
7. Required power : 5~10
8. Pouring diameter : 25
9. Intake diameter : 40
10. Cylinder length : 63.5
11. Valve type : BOLL or DISK
12. Weight
-
Available Excavators
1. KUBOTA - U-08 / U-10 / U-17 / U-20 / U-30 / KX-57 U-55
2. KOMATSU - PC18MR / PC20MR / PC30MR / PC50
3. YANMAR - SV08 / VIO15 / VIO15 / VIO20 / VIO30 / VIO35 / VIO55
4. KOBELCO - SK10 / SK17 / SK20 / SK27 / SK30 / SK35 / SK55
5. HITACHI - ZX8U / ZX10U / ZX17U / ZX30U / ZX35U / ZX50U
6.
-
? Product configuration ?
- Body (Picture 1): 1EA
- Manual pump (Picture 2): 1EA
- Cover(Picture 3): 1EA
? Spec ?
Cushion
Size: 36cm x 41cm, 41cm x 45cm
Cell : 6x6=36, 6x7=42
possible to order the product with the desired specifications
Weight
1120 g(cushion :
-
Disassembly procedure
- It is very easy to disassemble/assemble for maintenance.
Performance
-
Gear Pump
1.SinglePump
Spec]
3cc, 4cc, 6.5cc, 7.2cc, 10cc,11cc, 12cc, 14cc, 20cc
2.TandemPump
Spec]
12-6.5cc , 12-7.2cc
12-10cc, 14-6.5cc
14-10cc, 14-13cc
16-10cc , 16-12cc
20-14cc, 22-16cc
22-14cc, 24-14cc
Our employees are skillful and working environment is clear. To make customer satisfied, we are trying to keep the
-
*Simple design and easy handling by vertical type *Only casing and impeller are installed on lower part *Structure connected with motor of upper part through the column
-
-
Available Excavators
1. KUBOTA - U-08 / U-10 / U-17 / U-20 / U-30 / KX-57 U-55
2. KOMATSU - PC18MR / PC20MR / PC30MR / PC50
3. YANMAR - SV08 / VIO15 / VIO15 / VIO20 / VIO30 / VIO35 / VIO55
4. KOBELCO - SK10 / SK17 / SK20 / SK27 / SK30 / SK35 / SK55
5. HITACHI - ZX8U / ZX10U / ZX17U / ZX30U / ZX35U / ZX50U
6.
-
? Product configuration ?
- Body (Picture 1): 1EA
- Manual pump (Picture 2): 1EA
- Cover(Picture 3): 1EA
? Spec?
Cushion
Size: 36cm x 41cm, 41cm x 45cm
Cell : 6x6=36, 6x7=42
possible to order the product with the desired specifications
Weight
1130 g(cushion :
-
It is a positive displacement rotary pump known as a sliding vane pump.
It has a volumetric advantage, which is found in gear pumps, and it is more abrasion resistant. It is also operated with low noise. In particular, it doesn’t need a hood valve on the bottom of suction pipe due to its excellent suction capacity. In addition, as it shows
-
Available Excavators
1. KUBOTA - U-08 / U-10 / U-17 / U-20 / U-30 / KX-57 U-55
2. KOMATSU - PC18MR / PC20MR / PC30MR / PC50
3. YANMAR - SV08 / VIO15 / VIO15 / VIO20 / VIO30 / VIO35 / VIO55
4. KOBELCO - SK10 / SK17 / SK20 / SK27 / SK30 / SK35 / SK55
5. HITACHI - ZX8U / ZX10U / ZX17U / ZX30U / ZX35U / ZX50U
6. IHI -
-
*Self-priming pump driving automatically *Easy assembling with BACK PULL-OUT structure *Heavy Duty
-
Bolt Tensioner
Tensioning by existing technologies, such as the use of wrench, has faced many difficulties
occurred by the torsion stress and friction forces coming out of the thread and surface friction
between the bottom of nut and the surface of flange.
As one of alternatives, MJ Bolt Tensioners provide more reliable solution for accurate
-
The SH5000 is perfect boring machine in any construction site.
The reasons are as follows
1. With using 0.2 Track, work becomes convenient any places.
2. 360° rotating is so possible that side moving become easier.
3. oil pressure lever is attached in every work stations
4. Attaching concrete is possible.
1.
-
? Product configuration ?
- Body (Picture 1): 1EA
- Manual pump (Picture 2): 1EA
- Cover(Picture 3): 1EA
? Spec?
Cushion
Size: 36cm x 41cm
Cell : 8×9 = 72
possible to order the product with the desired specifications 7×7, 7×8, 8 x 8
Weight
1160 g(cushion :
-
It enables to feed all kinds of liquids from volatile low-viscosity liquids to high-viscosity liquids.
As it is a positive displacement pump, it is high quantitative and when feeding high-viscosity liquids, it is completely a self-priming pump, which provides less pulsation phenomenon.
As it has a simple structure, it is easy to assemble and
-
Hydrosys AW 46 is recommended for all indoor hydraulic systems, and for some outdoor hydraulic systems as well.
It is a zinc-free hydraulic oil that has been engineered to meet the requirements imposed on current and future hydraulic oils.
It is based on light, severely solvent-refined paraffin base oils with performance-enhancing additives.
-
*Gap adjustment of impeller is possible by minutely control of bearing housing *Easy assembling with BACK PULL-OUT structure *Heavy Duty