447MHz Low-Frequency Long Distance Unlimited Node Availability Energy Saving System Mesh Type Network Configuration Remote Configuration Distance Expansion By Using Repeater Unlimited node availability Asynchronous mesh network avoids unnecessary traffic consumption by adding CS feature inALOHA type to maximize efficiency of

A. Feature Correct operation by one-chip micom IC Easy control by soft touch Troublesome dissolution to the manipulation of the minimum Digital display of all facilities. Alarm After therapy time A 15 min treatment time automatic setting up at the same time with the power supply A treatment strength 50 % automatic setting

A. Feature Easy to apply on control pannel Auto-saving: preset used program Knee joint moving angle range: 5ÌŠ~130ÌŠ Femur length control extent: 27~43cm (Distance from coxa to articulatio genu) Tibia length control extent: 24~51cm (Distance from articulatio genu to talocrual joint)   B. Specification Power:

A. Feature Built-in 12 Basic Programs Programming: max 99 user's program setting Independent 4 channels of current carrying path: no interference Detailed operation: operate stimulation perameter by a second or 0.1 second Portable type: rechargeable, lasting max. 20h LCD display/ LCD Black Light mode Auto off function

A. Feature There is no need of operation or anesthesia, and it possibly gives medical treatment to out-patients with less pain by even only simple pretreatment. The therapy can be finished in a short time(10~15 minutes), and it does not need any hospitalization. About 1 hour after the therapy, patients can normally act. Its cure

A. Feature Correct operation by one-chip micom IC Easy control by soft touch  Troublesome dissolution to the manipulation of the minimum Digital display of all facilities. Alarm After therapy time  A 15 min  treatment time automatic setting up at the same time with the power supply A treatment strength 50 %

A. FEATURES Easy to use controlled by 7-inch touch screen. Auto save the previous mode Check the information about exercise in real time  Users can check and set exercise speed, resistance, hour, direction etc. Diversify movement for effective exercise Designed easy to store and move, lightweight Designed easy to maintain

A. Feature Easy to use controlled by 7-inch touch screen. Auto save the previous mode Check the information about exercise in real time  Users can check and set exercise speed, resistance, hour, direction etc. Diversify movement for effective exercise Designed easy to store and move, lightweight Designed easy to maintain the

A. Feature Easy to use controlled by 7-inch touch screen. Auto save the previous mode Check the information about exercise in real time  Users can check and set exercise speed, resistance, hour, direction etc. Diversify movement for effective exercise Designed easy to store and move, lightweight Designed easy to maintain the

A. Feature WINCH07 is an orthopedic treatment instrument for spinal diseases that improves the natural healing power of a damaged disc by restoring the position of a herniated disc to a normal position and inducing fluids, nutrient elements and blood through simultaneous treatment of decompression, extension, and extension of

A. Feature It has a built-in 7 sequential program for arm and leg, and easy to optimize. Customized mode: Users can select areas to apply air pressure where necessary. OSC mode makes you feel massaged by hand unlike the existing air insertion type. Check air pressure on the screen. 5 level speed Users can control time Up/Down while

A. Feature Intensity, Duration and Rate are the main three factors to control the electric irritability of nerve and ascia, Pre-programmed treatment pattern sets the compensate rate of these factors automatically according to the region of body to be treated. Interferential current in variety range of frequencies helps to select an optimum

A. Feature Convenient by L-U, U-L, CONT, INT. mode functions. Doing traction region program separately basic value input/save possible. Voice guidance(Voice Chip) function that inform traction start and finish. Can control pulling direction of exact angle and tractive force. Ergonomic design of Hanes region. SST-300 is for 2

A. Feature User can control an ultrasound output intensity, time, output angle for better effective results so possible to keep a body's each tissue balance in appropriate. Mode: 4 kinds of modes(Cont-Pulse-2Sec-5Sec) Use effect maximize by digital operation controlling and over current prevention circuit First head vibration

A. Feature   Automatic setting the compensation rates such as Intensity, Period and Duration which control excitability of nerve and fascia, by corporal regions to maximize the efficiency of stimulation. Digitally developed Interference Electric Field Computerized and digitally developed interference  electric field helps the

A. Feature CO2 Laser Scanner may be used for a variety of soft tissue ablation procedures including aesthetic laser surgery, where layer by layer micro-ablation of tissue is required.   B. Specification Power: AC220V/60Hz Weight: 5.2Kg Dimension: 180*384*135(mm) Duration Time: 20-90 min Scan Overlap Range:

A. Feature Control the output intensity in detail depends on affected part. (15steps) It's safe start with set in output "0" after power on or operation Easy operating menu. Good designed in a product for movement and warehousing and light finished materials. Designed for maintenance of product easily B.

A. Specification OUTPUT WAVEFORMS            - Bipolar           1. Precise: 470kHz sinusoid           2. Standard: 470kHz sinusoid           3. Macro: 470kHz sinusoid              - Monopolar

A.  Feature Hi Definition (HD) Video –Up to 1100line(HD-1024P / HDTV - 720p &  1080p) high native resolution medical video camera Progressive scan 3 CMOS, no up-scaling process (native 1080p) Small and ergonomic camera head- for superior comfort and control Four button camera head designs – control of 8

A. Feature Pneumatic tourniquets include 5 cuffs: double cuff 80 x 15 cm, double cuff 57 x 15 cm, single cuff 80 x 9 cm, single cuff 52 x 7.5 cm, single child cuff 40 x 7 cm Automatic pressure control 2 channels: 2 ports for 2 single cuffs or 1 double cuff use (33152) 4 ports for 2 double or single cuff use (33154) Separate